Linux; Installing Usb Connected Machine's Driver; Windows - Samsung CLX-3185 User Manual

Linux

Item
Operating Fedora 2~10 (32/ 64 bit)
system
OpenSuSE® 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0,
11.1 (32/64 bit)
SuSE Linux 9.1 (32 bit)
Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10 (32/64 bit)
Mandrake 10.0, 10.1 (32/64 bit)
Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit)
Debian 3.1, 4.0, 5.0 (32/64 bit)
Redhat® Enterprise Linux WS 4, 5 (32/64 bit)
SuSE Linux Enterprise Desktop 9, 10 (32/64 bit)
CPU Pentium IV 2.4GHz (Intel CoreTM2)
RAM 512 MB (1 GB)
Free HDD space 1 GB (2GB)
•It is necessary to claim swap partition of 300 MB or larger for working
with large scanned images.
•The Linux scanner driver supports the optical resolution at maximum.

Installing USB connected machine's driver

A locally connected machine is a machine directly connected to your
computer by a USB cable.
Only use a USB cable no longer than 3 m (10 ft.).

Windows

You can install the machine software using the typical or custom method.
The following steps are recommended for most users who use a machine
directly connected to your computer. All components necessary for machine
operations will be installed.
1. Make sure that the machine is connected to your computer and powered
on.
If the "Found New Hardware Wizard" appears during the
installation procedure, click Cancel to close the window.
2. Insert the supplied software CD into your CD-ROM drive.
•The software CD should automatically run and an installation window
will appear.
•If the installation window does not appear, click Start and then Run.
Type X:\Setup.exe, replacing "X" with the letter, which represents
your CD-ROM drive. Click OK.
•If you use Windows Vista, Windows 7 or Windows Server 2008 R2 click
Start > All programs > Accessories > Run.
Type X:\Setup.exe replacing "X" with the letter, which represents
your CD-ROM drive and click OK.
•If the AutoPlay window appears in Windows Vista, click Run
Setup.exe in Install or run program field, and click Continue in the
User Account Control windows.
•If the AutoPlay window appears in Windows 7 or Windows Server 2008
R2, click Run Setup.exe in Install or run program field, and click
Yes in the User Account Control window.
Requirements
Getting started_ 3
3. Select Install Now.
If necessary, select a language from the drop-down list of Installation
Language.
The Advanced Installation has two options, Custom Installation
and Install Software Only. The Custom Installation allows you
to select the machine's connection and choose individual
component to install. The Install Software Only allows you to
install the supplied software such as Smart Panel. Follow the
guide in the window.
4. Read License Agreement and select I accept the terms of the
License Agreement. Then, click Next.
The program searches for the machine.
If your machine is not connected to the computer, the error