Safety Symbols Safety Symbols Make sure to follow the directions below to prevent accidents and damage to the product by using the product correctly. Failure to follow the accompanying directions may lead to serious injury or death. Failure to follow the accompanying directions may lead to serious injury or death. Safety Symbols Power Insert the power plug correctly until it is firmly in place.
Do not connect more than one appliance to a single outlet, as an overheated outlet may cause fire. Do not use force to pull the power cord. Make sure to turn the power off and disconnect the power plug from the outlet before moving the product.
Page 4
When installing the product on a cabinet or shelf, do not let the front end of the product project beyond its front edge. Do not place the power cord near a heater, as the power cord may melt, causing electric shock or fire. Do not install the product in a location exposed to oil, smoke, moisture, water, or rainwater, or in a car.
Page 5
Do not insert any metal objects such as chopsticks, wire, or gimlets, or flammable items such as paper or matches into the terminals at the back of the product, as this may cause electric shock or fire. If water or any foreign substance enters the product, make sure to turn the product off disconnect the power plug from the outlet, and contact a Never disassemble, repair, or modify the product yourself.
Page 6
If the product has been dropped or the product casing is damaged, turn it off and disconnect the power plug. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household waste at the end of its working life.
Page 7
Features Components Features Image display solutions through networking You can view digital images without turning on your PC or printing out images. Images stored by a web content provider such as Server are transmitted to your digital photo frame via a network. (Server provides inter operability allowing you to send photos from your cell phone or photos on a web site to your digital photo frame via a photo (mms) mail.) With a networked digital photo frame, you can collect several of your photo albums and family albums into...
Page 8
Digital Photo Frame (Colors may differ for each product.) Manual Quick Start Warranty User Manual Cleaning cloth Cables USB cable LAN cable Power Adapter (A-B type) Power cord Sold separately...
Page 9
CF card Features Components Front Power Shows the power status. Indicator When the product is powered on, the power light turns on. Features Components Back SD/MMC card Front Back (Buttons) Front Back (Buttons) Side Side Side Side...
Page 10
POWER Connect the power adapter to this jack. Connect the power cord to the power terminal of the power adapter. If your digital photo frame is connected to a Server site via the LAN, you can download its contents to your digital photo frame. Connect a PC or an external device using a USB cable.
Turns the product on or off. ] Power Button [MENU] Menu Button Displays the menu at the center bottom of the screen. Adjusts the brightness when displaying photos or playing movies. ] Brightness Button ] Up Button Moves the selected frame in the menu up. Moves the selected frame in the menu to the left.
Page 12
Memory Card You can insert a CF card or SD/MMC card into this slot to view and use the content stored on Slot them. Open the cover using the groove marked OPEN and insert a card. CF CARD You can insert a CF card into this slot to view and use the contents stored on it.
Power Connecting the Power Connect the power adapter to the POWER terminal at the back of the product. Connect the power cord to the power adapter. If all cables are connected, insert the power plug into a 220V outlet. Press the button at the right of the product to turn the product on.
If your internet service is normal but you cannot connect to Server, contact a service center so that a service engineer visits your home to solve the problem. For other problems, you need to visit a Samsung service center. If the Internet service for transmitting photos is not provided in your area, the networking functions may not function.
(For more information on external devices and their cables, contact a relevant service center.) Samsung carries no liability for external device malfunctions caused by using any cable except the standard cables specified for each device. Some external products provide a cable that does not meet USB standards. Hence, they may cause a malfunction.
Connect to the up stream terminal of your digital photo frame. Connect the USB terminal of your PC. Power Connecting a Memory Card CF CARD Slide the card into in the direction marked on the top of the card. To remove a memory card, press the button at the top of the card slot.
Direct button MENU The menu is automatically hidden after one minute. Button Shows the menu at the bottom center of the screen. MENU (MENU button) Pressing the menu button releases the Volume/Brightness mode. (Up button) Direct button Description Action/Stop...
Page 18
Button Moves the selected frame on the menu up. (Up button) Operating During Playback Position Volume Up (when the volume adjustment window is displayed) Play Mode Brightness Up (When the brightness adjustment window is displayed) Operating Contents List Position Sub menu of Moves up (Down button) Button...
Page 19
Button Moves the selected frame on the menu to the left. (Left button) (Right button) Button Moves the selected frame on the menu to the right. (Right button) / SHOW (Select / Slide Show button) Button Button Operation / SHOW Description Description Description...
Page 20
(Select / Slide Show button) Operating During Playback Position Shows/Hides the list of thumbnails Play Mode at the bottom. Operating Contents List Position Sub menu of Select and play HOME Play If there is an existing content item that was played, it returns to that playback screen. Contents List Loads the contents stored on the media connected via USB port.
Page 21
Shows the selected file in an amber frame. Shows on the List If there are no supported files on the connected media, "No screen Contents Available." is displayed. Server Loads the contents onto the Server. Internal Loads the contents stored in the Internal Memory. Memory Connected Storage Media SD / MMC...
Page 22
If Repeat One is selected for Play Mode, only tiling effect is given Play Mode during playback. Information Display - you select. Info. Display Date & Time, File Location Auto Play - Select whether to playback the Server contents automatically or not Play the content automatically.
Page 23
Play the file. Play Return to the first of the slide show. Stop Play the previous file in the contents list. Previous File Play the next file in the contents list. Next File MENU : Stops the file being played back Mode Select a mode among Repeat All, Random, and Repeat One.
Page 24
Save Save the file being displayed in the selected location. Delete Delete the file being displayed. Info. Show the information on the file being displayed. Movie Mode Select a mode among Repeat All, Random, and Repeat One. Save Save the file being played back in the selected location. Delete Delete the file being played back.
Page 25
If your internet service is normal but you cannot connect to Server, contact a service center so that a service engineer calls on you. For other problems, you need to personally visit a Samsung service center. Using a Device Select the Contents List of Connected via Select USB.
Page 26
automatically. Loading the contents from a memory card may take some time. To remove a memory card, press the button at the top of the card slot. Using Memory Only applicable to memory supported by the CF card adapter or SD card adapter. with a Card No guarantee is supported for memory cards and adapters other than CF, SD, MMC, Adapter...
Page 27
Move to a file using the I want to display other information including the time while my digital photo frame is turned on. Configuring the Select the Setup of Information to Select Show Info.. Display Select all items you want to display from among the Play Mode, BG Music, Number of Files, Server Cond., Date &...
Page 28
MINI-MO is a function that enables the Digital Photo Frame to be operated as the Secondary Monitor. Installing Frame Manager System Requirements Installation Installing USB driver Setting up the Mini-Monitor Frame Manager User's Manual How To Use Digital Photo Frame As Mini-Mo How To Use Digital Photo Frame As Mass Storage How to switch current mode to another Brightness Control...
Page 29
Find the directory installed above to connect when the Digital Photo Frame Driver is requested. The Driver is installed automatically and a tray icon(Frame Manager) as shown below will appear at the system tray. When the Mass Storage or the MINI-MO is selected, the pertinent function will be run.
System Requirements System Requirements OS : Windows XP SP2 USB : Extended Host Controller (EHCT) for USB 2.0 RAM : 256 MB or above System Requirements Installation Install the Application first before connecting the Digital Photo Frame to a PC. To Install the Frame Manager Software and USB Secondary Display - 1.
System Requirements Installing USB driver Now Switch on the device (Samsung Digital Photo Player) and connect the USB cable (provided in the box with the unit) to the PC. 1. Connect the larger "standard USB" connector to the USB port of the PC. Connect the smaller "mini-USB" connector to the "PC"...
Page 34
4. Select "Install from a list of specific location (Advanced)". Click on Next button. 5. Select "Search for the best driver in these locations" option. Check "Include this location in the search:"...
Page 35
Now click on "Browse" button to select the directory where the Frame Manger software is installed. (Refer to Frame Manager Installation step 3). 6. Now press "Next" button. 7. Press "Continue Anyway" button. 8. Press "Finish" button.
Page 36
When the PC is restarted the Frame Manager icon will appear in system tray. 1. To use the Samsung Digital Photo Frame as USB Secondary Display - Go to Control Panel -> Display -> Settings ->Select Samsung MiniMonitor Display Card.
Page 37
NOTE : Never make this as primary monitor. 2. Press "Ok" or "Apply".
Page 38
How To Use Digital Photo Frame As MINI-MO If USB cable is not connected, and Photo Frame is switched on, it starts working as Album. To use the Samsung Digital Photo Frame device as USB Secondary Monitor, First install the Frame Manager on the Windows XP PC.
Page 39
How To Use Digital Photo Frame As Mass Storage If USB cable is connected to PC, Disconnect and connect again. Following screen will be shown on Digital Photo Frame. Select Mass-Storage option by clicking the button. Use up-down (button 4 and button 6 in above figure) button on device for selection and by pressing menu button (button 3 in above figure) on device.
2. From the Menu, Click on menu item MINI-MO. 3. Rotate to 90 in MINI-MO Mode When the device is in MINI-MO mode 0 Degree, select "Rotate to 90°" to rotate the display by 90 degrees. 4. Rotate to 0 in MINI-MO Mode When the device is in MINI-MO mode 90 Degree, select "Landscape"...
Update Firmware To update the firmware from PC through USB cable, please ensure the following : SAMSUNG Digital Photo Frame must be connected with PC using USB cable Device Mode must be connected as MINIMO or MASS STORAGE Do not disconnect USB cable during UPDATE operation Do not operate or switch of Digital Photo Frame Device during UPDATE operation Remove SD/MMC or CF card, USB stick, if inserted into device before running UPDATE.
Page 42
9. During the transfer of file/files, following progress bas will appear. 10. After this please wait for completion of update on device.
Specifications Items Type Resolution Brightness Panel Contrast Ratio View Angle Interface Supported Formats Built-in Memory Wired Network Wireless Sound Media (Memory Card) Power Content Files Photo File FAT16,FAT32 (200 Characters) Specifications Supported Files Specifications 7" TFT 800 x 480 360 cd/m 300 : 1 40/60/60/60 (Up-Down/Right-Left) 6-bit...
Page 44
Music File Movie File Networking Networking Information on screen I/O Device Adjustment Memory Card File Management The product design may differ according to the model, and specifications are subject to change without prior notice for product performance enhancement. Class B Equipment (Information Communication equipment for residential use) This product complies with the Electromagnetic Compatibility Directives for residential Use and can be used in all areas including common residential areas.
(See Setup>Picture>Brightness) Check the file extension. If it is not of a supported format, only the Samsung logo is displayed while the file is being played. (Only MPEG4 and WMV9 movies are supported.) First, disconnect the LAN cable at the back of the product and try to turn the product off and on.
Page 46
I have connected an external device (USB memory device or MP3 player), but it does not work. The screen is displayed but there is no sound for MPEG4 and WMV9 movies. The screen is displayed but there is no sound for MPEG4 and WMV9 movies. The movie freezes at some points.
Page 47
If you need a product service, contact or visit a Samsung service center. For services for network connection and the Server. Services Samsung Electronics web site If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. U.S.A 1-800-SAMSUNG (7267864)