mundoclima MUENR-H6 Series Installation & Owner's Manual page 21

Mini chiller inverter
Hide thumbs Also See for MUENR-H6 Series:
Table of Contents

Advertisement

NO.
Icon
Up
23
1.(Value increase)
2.Forward to the previous interface.
Down
1.(Value decrease)
24
2.Backward to the next interface.
II.Control panel operation description
1) ON/OFF
Operation mode one:
Power off: Long press "
interface. The panel displays "OFF" and other icons
will be extinguished. The unit stops.
Power on: When the display panel shows "OFF", long
press "
" for 3s and wait for the unit to enter
standby mode. Then power on the unit according to
Operation mode two.
Operation mode 2:
Power off: Press "
mode choice function and the icon which indicate the
current mode will flicker. Press "
choose power off mode, "
moment. Press "
mode. By this time, "
the unit stops.
Power on: In the power off mode, press "
enter mode choice functionn. Press "
to choose one kind of "power on" mode, the mode
icon will flicker at the moment. Press "
confirm the power on mode. The unit will run as the
chosen mode when the mode icon will be constantly
light.
2) Mode choice and temperature settings
Press "
" in the main interface to enter mode
choice function. The "Mode" icon will flicker. Click
"
" circularly to choose a mode. The circulating
order is "Cooling mode"→"Heating mode"→"Water
pump mode" →"Power off mode" → "Cooling mode".
The chosen mode will flicker. Press "
to increase/decrease the temperature in the chosen
mode.
Press "
" to confirm power off mode and the
set temperature. Mode icon will be constantly light
and the unit will run as the chosen mode.
Press "
" or "
" in the main interface to
increase/decrease the temperature in the chosen
mode.
3) Clock setting
Long press "
" for 3s to enter function interface.
"
" clock icon will flicker. Press "
clock setting function. "
light and the first 2 digits on nixie tube will flicker. Press
"
" or "
" to set minute. Press "
finish setting and "
4) Timing setting
1. Timing on setting
Long press "
" for 3s to enter function interface.
"
" clock icon will flicker. Press "
enter timing on function. "
Description
" for 3s in the main
" in the main interface to enter
" circularly to
" will flicker at this
" button to confirm the power off
" will be constantly light and
" to
" circularly
" to
"or "
" to enter
" icon will be constantly
" when
" will be extinguished.
" again to
" will flicker and press
"
" to enter timing on setting.
At this moment, last 2 digits of the nixie tube display
"01" which means the first group setting begins. Press
"
" to the next step.
By this time, mode icon will flicker and press "
to choose timing on mode. Press "
your choice and go to the next step.
By this time, the last 2 digits of the nixie tube will
flicker and press "
and set the temperature of the inlet water. Press
"
" to confirm and move to the next step.
By this time, the first 2 digits of the nixie tube will
flicker and press "
on. Press "
setting automatically. The last 2 digits of the nixie tube
will flicker and press "
setting of timing on.(minimal unit of minute adjustment:
15 minutes) .
Press "
finished and "
When processing the second timing setting, repeat the
1-2 operation above. When the nixie tube displays "01"
and flicker, press"
on group. When the nixie tube displays " 02 " which
means setting timing on function of the second group.
Refers the timing on setting operation of group 1 to set
that of group 2.
● Long press "
interface to reset the parameter during setting clock
timing.
"
2.Timing off setting
Long press "
function interface. Press "
timing off function. "
to enter timing off setting.
At this moment, the last 2 digits of the nixie tube
display "01" which means the first group setting begins.
Press "
By this time, the first 2 digits of the nixie tube will flicker
and press "
Press "
" to confirm and switch to minute setting
automatically. The last 2 digits of the nixie tube will
flicker and press "
of timing off. Press "
setting is finished and "
When processing timing setting of group 2, repeat the
1-2 operation above. When the nixie tube displays "01"
and flicker, press "
off group. When the nixie tube displays "02"which
means setting timing off function of the second group.
" or "
" to adjust temperature
" or "
" to adjust time of timing
" to confirm and switch to minute
" or "
" to adjust minute
" to confirm. The first group setting is
" will be constantly light.
" or "
" to choose the timing
" for 3s to return to the previous
" for 3s in the main interface to enter
" circularly to enter
" will flicker and press "
" to the next step.
" or "
" to adjust time of timing off.
" or "
" to adjust minute setting
" to confirm. The first group
" will be constantly light.
" or "
" to choose the timing
"
" to confirm
"
20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MUENR-H6 Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents