Maintenance And Care; Safety Instructions - Seecode 231818 Manual

TIP: Pre-dry long hair slightly with a hairdryer to shorten the drying time and
achieve the desired result faster.
USE CAUTION: Start with a low setting to test the correct tempera-
ture for your scalp.
As a general guideline, use the high speed setting for coarse drying for
thick hair and the low setting for finer and more precise control during
styling.
Start drying hair at the back of the head, then continue along the sides of
the head to the forehead.
DO NOT concentrate the airflow on one area for long periods of time.
NOTE: During the first few minutes of the first application you may noti-
ce smoke and a slight odour. This is normal and will disappear quickly.

MAINTENANCE AND CARE:

• Always unplug and allow to cool down before cleaning.
• Regularly check the air inlet of the brush and remove any accu-
mulated dirt and deposits. Deposits can reduce the airflow and
damage the brush.
• Never use the following chemicals to clean the product: thinner,
benzine alcohol or other flammable chemicals.
• DO NOT wrap the cable around the unit: This may cause the cable
to wear out.
• Use a soft, dry cloth for cleaning

SAFETY INSTRUCTIONS:

To use the appliance correctly and safely, it is very important that the
user reads the instructions below carefully before use. Please keep
these instructions for future reference.
The area of the brush with the bristles becomes hot, DO NOT
TOUCH THIS AREA, WHILE THE BRUSH IS ON.
If the machine does not work properly, first check the plug and then
check that the main power supply is switched on.