PHILIPS Respironics OmniLab Advanced + Clinical Manual page 39

Alarm Priority
Low Battery Escalates
(When Battery from
is Attached) Medium to
High
AC Power Medium
Disconnected
(When Battery
is Attached)
Stuck Key Low
Insert SD Low
Card (When
Oximeter is
Attached)
Informational Messages
Message Priority
Card Error Info
Heated Tube Info
Failure
Humidifier Info
Failure
Audible Visual Indicators
◊◊◊ Medium Priority -
(Medium - Yellow flashing button;
when approx. Low External Battery
20 minutes message appears in
remains) yellow; on status panel,
box around battery is
yellow.
◊◊◊ ◊◊ High Priority - Red
(High - when flashing button; Low
approx. 10 External Battery
minutes message appears in
remains) red; on status panel,
box around battery
is red.
◊◊◊ Yellow flashing
button; AC Power
Disconnected
message, and a box
appears around
battery in use.
◊◊ Solid yellow button;
Keypad Stuck message.
◊◊ Solid yellow button;
Insert SD Card
message
Audible Visual Indicators
◊ Card Error message
None Flashing icon:
None Flashing icon:
Device Action
Operates Switch to an alternate battery, or
switch to AC power.
Switches to Check AC power adapter and
alternate reconnect it if it has become
power source disconnected. Make sure device is
not connected to an overloaded
AC circuit.
Operates Check the keys to determine if
they are lodged in the case. If alarm
continues, place patient on alternate
source of therapy and contact
product support.
Operates Insert an SD card into the device or
remove the oximeter.
Device Action
Operates Remove SD Card and use another
card, if available. Ensure card meets
specifications. If condition persists,
contact product support.
Device Tubing may be overheating or
operate; malfunctioning. Turn off airflow
Humidifier and reconnect the heated tubing
shuts down to the humidifier according to the
humidifier instructions. If the alert
continues to occur, contact product
support.
Device Humidifier failure. Turn off airflow
operate; and reconnect the humidifier to the
Humidifier device according to the humidifier
shuts down instructions. If the alert continues to
occur, contact product support.
User Action
User Action
35