Table of Contents
Advertisement
D Keep the belts clean and dry. If they need cleaning, use a
mild soap solution or lukewarm water. Never use bleach,
dye, or abrasive cleaners − they may severely weaken the
belts.
D Replace the belt assembly (including bolts) if it has been
used in a severe impact. The entire assembly should be
replaced even if damage is not obvious.
Front seat belt buckle illumination
16L020
Opening the driver's door lights up the driver's seat belt buckle
for easy use. The same applies for the front passenger's door and
seat belt buckle.
The light remains on for 15 seconds after the door is closed, but goes
off immediately when all doors are locked.
COMFORT ADJUSTMENT
Fastening front and rear seat belts
16L115-1
Adjust the seat as needed and sit up straight and well back in the
seat. To fasten your belt, pull it out of the retractor and insert the
tab into the buckle.
You will hear a click when the tab locks into the buckle.
The seat belt length automatically adjusts to your size and the seat
position.
The retractor will lock the belt during a sudden stop or on impact.
It also may lock if you lean forward too quickly. A slow, easy motion
will allow the belt to extend, and you can move around freely.
81
Advertisement
Table of Contents
