Table of Contents
Advertisement
62L002-1
" 1 Add oil
2 O.K.
3 Too full
4. Pull the dipstick out and look at the oil level on the end. If it is
between the full line ( 5 ) and the low line ( 4 ), it is O.K.
62L003-3
If the oil level is below or only slightly above the low line, add
engine oil of the same type as already in the engine.
Remove the oil filler cap and add engine oil a little at a time, checking
the dipstick. The approximate quantity of oil needed to fill between
the low line and the full line on the dipstick is indicated below for
reference.
When the level reaches within the correct range, return the filler cap
and turn the cap clockwise until you hear a click.
Oil quantity. L (qt., lmp. qt.)
NOTICE
Avoid overfilling, or the engine could be damaged. Check the oil
level on the dipstick once again after adding the oil.
ENGINE
1.5 (1.6, 1.3)
231
Advertisement
Table of Contents
