Table of Contents
Advertisement
STARTING AND DRIVING
31L008-3
" 1 Power mode
2 Normal mode
2. Set the driving pattern selector switch to the "Normal"
position.
Your transmission has a driving pattern selector switch which allows
you to select "Power", "Normal" or "Snow" mode to suit your
driving condition. For ordinary driving, Lexus recommends that
you use the "Normal" position to improve fuel economy.
3. For more powerful acceleration and sporty driving, use the
"Power" position.
In the POWER position, the "ECT PWR" light in the instrument
cluster is on and the transmission is shifted up at higher vehicle
speeds and shifted down more responsively than in the NORMAL
position.
For "Snow" mode, see "Electronic Throttle Control System" on
page 167.
162
" 1 "D" (Drive) position
3 Snow mode
4. With your foot holding down the brake pedal, shift the
selector lever to "D".
Always use the "D" position to improve fuel economy and quiet
driving. Only in this position, shifting into the overdrive gear is
possible. However, while the engine coolant temperature is low, the
transmission will not shift into the overdrive gear even in the "D"
position. (See "(b) Using engine braking" and "(f) Good driving
practice" for exceptions.)
Never put your foot on the accelerator pedal while shifting.
31l055−2
2 Brake pedal
CAUTION
Advertisement
Table of Contents
