Checking Power Steering Fluid - Lexus LS400 Owner's Manual

CHASSIS
CHECKING POWER STEERING
FLUID
63L002−1
Check the fluid level on the dipstick. If necessary, add automatic
R
transmission fluid DEXRON II or III.
If the vehicle has been driven around 80 km/h (50 mph) for 20
minutes (a little more in frigid temperatures), the fluid is hot (60_C
− 80_C or 140_F − 175_F). You may also check the level when the
fluid is cold (about room temperature, 10_C − 30_C or 50_F − 85_F)
if the engine has not been run for about five hours.
240
63L003−1
" 1 If cold O.K.
2 If hot O.K. 3 Add fluid
1. Clean all dirt off the reservoir.
2. Remove the filler cap by turning it counterclockwise and wipe the
dipstick clean.
3. Reinstall the filler cap.
4. Remove the filler cap again and look at the fluid level. If the fluid
is cold, the level should be in the "COLD" range on the dipstick.
Similarly, if it is hot, the fluid level should be in the "HOT" range.
If the level is at the low side of either range, add automatic
R
transmission fluid DEXRON II or III to bring the level within the
range.
5. After replacing the filler cap, visually check the steering box case,
vane pump and hose connections for leaks or damage.