1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. Samtron 74V
  6. User manual

Samsung Samtron 74V User Manual

Hide thumbs

Advertisement

Table of Contents

Install drivers
SAMTRON 73V / 93V / 74V

Advertisement

Table of Contents
loading

Related Manuals for Samsung Samtron 74V

Summary of Contents for Samsung Samtron 74V

  • Page 1 Install drivers SAMTRON 73V / 93V / 74V...
  • Page 2 Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Do not disassemble Do not touch Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Image Retention Free Do not use a damaged or loose plug.
  • Page 3 Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose.
  • Page 4 This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not project beyond the showcase or shelf. Dropping the product may cause damage to the product or personal injury. Do not place the product on an unstable or small surface area.
  • Page 5 Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance.
  • Page 6 Contact the Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire. Others Do not remove cover (or back). This may cause an electric shock or fire.
  • Page 7 Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small metal objects on the monitor. This may cause malfunction, an electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact the Service Center.
  • Page 8 Do not install the product on an unstable, uneven surface or a location prone to vibrations. Dropping the product may cause damage to the product or personal injury. Using the product in a location prone to vibrations may shorten the lifetime of the product or may catch fire.
  • Page 9 SAMTRON 73V / 74V Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Unpacking Monitor Monitor Bottom Hanger Manual Warranty Card User's Guide, Quick Setup Guide (Not available in all locations) Monitor Driver Cable D-Sub Cable...
  • Page 10 Front Menu button [ ] Use this button for open the on-screen menu and exits from the menu screen or closes screen adjustment menu. Use this button for navigate and select menus or adjust the menu items in 2,3. Adjust buttons [ the menu screen.
  • Page 11 (The configuration at the back of the monitor may vary from product to product.) Power port Connect the power cord for your monitor to the power port on the back of the monitor. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
  • Page 12 Please make sure the following items are included with your monitor. y items are missing, If an Unpacking Monitor Monitor Manual Quick Setup Guide Cable SAMTRON 93V contact your dealer. User's Guide, Monitor Dirver Warranty Card...
  • Page 13 Front Use this button for open the on-screen menu and exits from the menu Menu button [ ] screen or closes screen adjustment menu. 2,4. Adjust buttons [ Adjust items in the menu. Use this button for turn the monitor on and off./ Power button [ ] / Power indicator This light glows green during normal operation, and blinks green once as...
  • Page 14 Rear (The configuration at the back of the monitor may vary from product to product.) Power port Connect the power cord for your monitor to the power port on the back of the monitor. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
  • Page 15 Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Using the D-sub (Analog) connector on the video card. 2-1. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2.
  • Page 16 1. Monitor and Bottom 2. Monitor and Hanger Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pad Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. Remove four screws and then remove the Stand from the LCD monitor.
  • Page 17 1. Insert CD into the CD-ROM drive. 2. Click "Windows XP/2000 Driver" 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see following message window, then click the "Continue Anyway" button. Then click "OK"...
  • Page 18 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab. 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7.
  • Page 19 8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samtron Monitor homepage. http://www.samtron.com/ 9.
  • Page 20 3. Choose the "Settings" tab and then click "Advanced..". 4. Choose "Monitor". Case1: If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation Case2: If the "Properties" button is active, click the "Properties" button then follow next steps continually.
  • Page 21 Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. Connected to a Macintosh.
  • Page 22 Attaching a base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. A .Monitor B .Mounting interface pad Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. Remove the four screws and then remove the Stand from the LCD monitor.

  • Page 23: Microsoft ® Windows ® Xp Operating System

    "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samtron.com/ 5. Monitor driver installation is completed. When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor.
  • Page 24 4. Click the " Properties " button on the " Monitor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6.

  • Page 25: Microsoft ® Windows ® 2000 Operating System

    " OK " button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samtron.com/ 9. Click the " Close " button then click " OK " button continually.
  • Page 26 1. Choose " OK " button on the " Insert disk " window. 2. Click the " Browse " button on the " File Needed " window. 3. Choose A:(D:\Driver) then click the "Open" button and then click " OK " button. How to install 1.
  • Page 27 SAMTRON 73V / 74V 1. Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. 2. This buttons allows you to adjust items in the menu. 3. This buttons allows you to adjust items in the menu. 4.
  • Page 28 Menu When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. To make the automatic adjustment function sharper, execute the 'AUTO' function AUTO while the...
  • Page 29 Brightness 1. Picture Color Tone 2. Color Coarse 3. Image Language 4. OSD Image Reset 5. Setup 6. Information Picture Menu You can use the on-screen menus to change the brightness according to personal preference. Brightness Direct Access Feature : When OSD is not on the screen, push the button to adjust brightness.
  • Page 30 Menu The tone of the color can be changed and one of four modes Color Tone can be selected - Cool, normal, Warm and Custom. Color Control Adjusts individual R,G,B color balance. Select one of three pre-defined gammas. Gamma Mode 1 : Shows normal gamma Mode 2 : Shows higher gamma(brighter) Mode 3 : Shows lower gamma(darker) Image...
  • Page 31 Removes noise such as horizontal stripes. If the noise persists Fine even after fine tuning, repeat it after adjusting the frequency (clock speed). Sharpness Changes the clearance of image. H-Position Changes the horizontal position of the monitor's entire display. Changes the vertical position of the monitor's entire display. V-Position Menu You can choose one of the seven languages.
  • Page 32 Menu Image Reset Image parameters are replaced with the factory default values. Color Reset Color parameters are replaced with the factory default values. Information Menu Shows a video source, display mode on the OSD screen. Information Description Description Play/Stop...
  • Page 33 SAMTRON 93V 1. Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. 2. This buttons allows you to adjust items in the menu. 3. This buttons allows you to adjust items in the menu. 4.
  • Page 34 Menu When the 'AUTO' button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. To make the automatic adjustment function sharper, execute the 'AUTO' function AUTO while the...
  • Page 35 Brightness 1. Picture Color Tone 2. Color Coarse 3. Image Language 4. OSD Image Reset 5. Setup 6. Information Picture Menu Adjust the Brightness. Direct Access Feature : When OSD is not on the screen, Push Brightness the button to adjust brightness. Adjust the Contrast.
  • Page 36 Menu The tone of the color can be changed and one of four modes Color Tone can be selected - Cool, normal, Warm and Custom. Color Control Follow these steps to adjust individual R,G,B color balance. Select one of three pre-defined gammas. Gamma Image Menu...
  • Page 37 repeat it after adjusting the frequency (clock speed). Sharpness Follow these instuction to change the clearance of image. Follow these instructions to change the horizontal position of the H-Position monitor's entire display. Follow these instructions to change the vertical position of the V-Position monitor's entire display.
  • Page 38 Menu Image Reset Image parameters are replaced with the factory default values. Color Reset Color parameters are replaced with the factory default values. Information Menu Shows a video source, display mode on the OSD screen. Information Description Description Play/Stop...
  • Page 39 Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call, section or contact your Symptom Is the power cord connected properly? No images on the screen.

  • Page 40: Check The Following Items If There Is Trouble With The Monitor

    There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? The screen shows Is the screen displaying only one color strange colors or just as if looking at the screen through a cellophane paper? black and white.

  • Page 41: Self-Test Feature Check

    Q & A Question How can I change the frequency? How can I adjust the resolution? How can I set the Power Saving function? How can I clean the outer case/LCD Panel? Self-Test Feature Check Self-Test Feature Check Warning Messages Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

  • Page 42: Warning Messages

    Warning Messages If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable. Environment The location and the position of the monitor may influence the quality and other features of the monitor.
  • Page 43 General General SAMTRON 73V / 74V Model Name LCD Panel Size 17inch Diagonal Display area 337.92 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution...
  • Page 44 31.469 Power saving mode EPA/ENERGY 2000 Green Green, Blinking Less than 1W (Off-mode) ® compliant and ENERGY2000 ® Partner, SAMSUNG has determined that this ® guidelines for energy efficiency. Vertical Pixel Clock Frequency (Hz) 70.086 59.940 Power Switch off Black...
  • Page 45 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC, 1152 x 870 68.681 VESA, 640 x 480 37.500 VESA, 640 x 480 37.861 VESA, 800 x 600 35.156 VESA, 800 x 600 37.879 VESA, 800 x 600 46.875 VESA, 800 x 600...
  • Page 46 General General Model Name SAMTRON 93V LCD Panel Size 19inch Diagonal Display area 372.32 (H) x 301.56 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TFT active matrix Synchronization Horizontal 31 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution...

  • Page 47: Preset Timing Modes

    31.469 Power saving mode EPA/ENERGY 2000 Green Green, Blinking Less than 1W (Off-mode) ® compliant and ENERGY2000 ® Partner, SAMSUNG has determined that this ® guidelines for energy efficiency. Vertical Pixel Clock Frequency (Hz) 70.086 59.940 Power Switch off Black...
  • Page 48 IBM, 720 x 400 31.469 MAC, 640 x 480 35.000 MAC, 832 x 624 49.726 MAC, 1152 x 870 68.681 VESA, 640 x 480 37.500 VESA, 640 x 480 37.861 VESA, 800 x 600 35.156 VESA, 800 x 600 37.879 VESA, 800 x 600 46.875 VESA, 800 x 600...
  • Page 49 RFC: SEM950215S98 Via Lopez Portillo No. 6, Col. San Francisco Chilpan Tultitlan, Estado de Mexico C.P. 54940. Mexico D.F. Mexico IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO. S.A. de C.V. Tel: 01(55) 5317 2551/3410/3409 Vía Lopez Portillo No. 6, Col. San Fco. Chilpan Tultitlán, Estado de México, C.P.

  • Page 50: For Better Display

    SAMTRON TOKYO 17TH, HAMACHO CENTER BLDG. 2-31-1, NIHONBASHI-HAMACHO, CHOU-KU, TOKYO 103, JAPAN TEL : (81-3) 5641-9860 FAX : (81-3) 5641-9861 SAMTRON U.S.A. SAMTRON COMPUTER PRODUCTS CUSTOMER SERVICE 400 Valley Road Suite 201, Mt. Arlington, NJ 07856 TEL : 973-601-6200, FAX : 973-601-6001 1-800-SAMTRON (1-800-726-8766) Terms Dot Pitch...
  • Page 51 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
  • Page 52 Federal Communications Commission. It is available from the U.S. Government Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4. The party responsible for product compliance: SAMSUNG ELECTRONICS CO., LTD America QA Lab of Samsung 3351 Michelson Drive, Suite #290, Irvine, CA92612 USA Tel) 949-975-7310...
  • Page 53 MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. European Notice(Europe Only) Products with the CE marking comply with the EMC Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.

  • Page 54: Environmental Requirements

    There are also other characteristics of a monitor, such as energy consumption levels, that are important from both the working and natural environment viewpoints. Since all types of conventional electricity generation have a negative effect on the environment (acidic and climate-influencing emissions, radioactive waste, etc.) it is vital to conserve energy.
  • Page 55 electronics components concerned with the display unit. CFCs (freons) CFCs (freons) are sometimes used for washing printed circuit boards and in the manufacturing of expanded foam for packaging. CFCs break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on Earth of ultraviolet light with consequent increased risks of skin cancer (malignant melanoma).
  • Page 56 via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
  • Page 57 For recycling information for TCO'03 certified monitors, for the residents in the following countries, please contact the company corresponding to your region of residence. For those who reside in other countries, please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way.
  • Page 58 Mercury Statement (LCD Monitor, LCD TV, DLP Projection TV, Projector for USA only) LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS For details see lamprecycle.org, eiae.org, or call 1-800-Samsung...

  • Page 59: Product Information (Image Retention Free)

    PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate correct usage of LCD products in order to protect them from Image retention.
  • Page 60 The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns.

This manual is also suitable for:

Syncmaster 73vSyncmaster 93vSamtron 73vSamtron 93v

Table of Contents