Connecting Tv - Samsung SyncMaster 510MP User Manual

2. Connecting TV

Connecting Your
Monitor
Installing the
Monitor Driver
Installing a VESA
base
3. Connecting EXT.(SCART)
You may view television programs on the monitor if it is connected to an antenna or CATV cable
without installing any separate TV reception hardware or software on your computer.
1. Connect the CATV or antenna coaxial cable to the Antenna terminal on the rear of the monitor.
You need to use a coaxial antenna cable.
2. Turn on the monitor.
3. Select TV using Source button among the external signal adjustment buttons.
4. Select a desired TV channel.
As this product is designed for PAL or SECAM signals only, you cannot view TV programs in
countries where NTSC signals are used.
Connect to the DVD Devices input if the device has a DVD connector.You can watch DVD simply by
hooking up the DVD with the monitor as long as the power is on.
1. Connect a video cable between the EXT jacks on the Monitor and the EXT jacks on the DVD / DTV
set top box.
2. Select COMP using the Video button from the user control buttons.