Table of Contents
Advertisement
4.2
Development Environment
The device can also be used with a firmware other than EDGEHOG Micro. In this section and in the next one you can find how to create your own firmware and
load it on the device.
All the software documentation you need to create a new firmware project and use the ESP32 chip is contained in the official Es
You can start from the
Get Started
Although all pages of the documentation are important, we would like to point out some useful links to start with the development of your own project.
Here you can find how to
Setting up Development Environment
This page shows how to
Creating Your Project
SENSE D47
D47 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.3 - Author: LM - Reviewed by SB & LP & GL Copyright © 2020 SECO S.p.A.
page and continue by carefully reading all the documentation provided by Espressif.
.
while at these links you can see how to
Configure
and
Build Your
Project.
25
Advertisement
Table of Contents
