Troubleshooting; Check List; Screen Display - Samsung SyncMaster 152B User Manual

Troubleshooting

Check List

Before calling for service, check the information in this section to see if you
can remedy any problems yourself. If you do need assistance, please call
the phone number on the warranty card, the phone number on the
Information section or contact your dealer.
Symptom
No images on the
screen. I cannot turn
on the monitor.
I cannot see the On

Screen Display.

Check List
Is the power cord connected properly?
Can you see "No Connection, Check
Signal Cable" on the screen?
If the power is on, reboot the computer
to see the initial screen(the login
screen), which can be seen.
Can you see "Video mode not
supported" on the screen?
There is no image on the screen. Is
the power indicator on the monitor
blinking at 1 second intervals?
Have you locked the On Screen
Display (OSD) Menu to prevent
changes?
User's Manual
Solutions
Check the power cord connection and
supply.
Check the signal cable connection.
If the initial screen (the login screen)
appears, boot the computer in the
applicable mode (the safe mode for
Windows ME/2000/XP) and then
change the frequency of the video card.
(Refer to the Preset Display Modes)
Note: If the initial screen (the login
screen) does not appear, contact a
service center or your dealer.
You can see this message when the
signal from the video card exceeds the
maximum resolution and frequency that
the monitor can properly handle.
Adjust the maximum resolution and
frequency that the monitor can properly
handle.
The monitor is in PowerSaver mode.
Press a key on the keyboard or move
the mouse to activate the monitor and
restore the image on the screen.
Unlock the OSD by pressing the MENU
button for at least 5 seconds.