Pivoting Appliance Cover - STIEBEL ELTRON DHB 18 STi Operating And Installation

INSTALLATIoN
Alternative installation options

13.11 Pivoting appliance cover

The appliance cover can be rotated for undersink installation.
f Remove the programming unit from the appliance cover by f
undoing the screws.
f Turn the appliance cover (not the appliance) and refit the f
programming unit.
f Plug the set value transducer cable into the PCB (see chapter f
"Installation / Commissioning / Initial start-up").
f Hook the appliance cover in at the top. Swivel the appliance f
cover down onto the back panel and press it until it engages
audibly.
f Secure the appliance cover. f
28 | DHB STi www.stiebel-eltron.com