Samsung NX30 User Manual page 274

Q6 When connecting to a computer-to-computer (Ad Hoc) network, I
cannot connect to another computer connected to the same com-
puter-to-computer network.
A1 Make sure that the security settings and network name of the computer-to-com-
puter (Ad Hoc) network is correct.
A2 Check the TCP/IP properties of the computers to be connected through the com-
puter-to-computer (Ad Hoc) network. All of the computers to be connected
through a computer-to-computer (Ad Hoc) network should be configured so that
their IP addresses are within the same subnet range.
If the IP address is configured to DHCP (Obtain an IP address automatically)
in TCP/IP properties, IP address is configured within the same subnet range
automatically.
If the IP address is configured to static IP in TCP/IP properties, select Use the
following IP address in the TCP/IP properties of the wireless adapter,
configure IP address:10.0.0.1~10.0.0.254, and Subnet mask:
255.255.255.0, and then try again.
Q7 When using a computer-to-computer (Ad Hoc) network, some-
times I cannot search the access point.
A It may happen occasionally when you are using a computer-to-computer (Ad
Hoc) network connection. Even if you cannot find some access points, the com-
puter-to-computer (Ad Hoc) network is operating properly. Click Refresh to view
the latest search result.
Q8 Running Help file while running Profile Wizard in the wireless
LAN program (PROSet) makes the PROSet window white.
A It will be displayed properly when you finish the profile wizard. It dose not affect
the program operation.
Q9 The network does not operate properly when both the wireless
and the wired network connections are simultaneously config-
ured with the same IP address.
A You cannot use the wireless and the wired network connections using the same IP
address simultaneously. To use either the wireless or the wired network in turn
with the same IP address, you have to Disable whichever network device will not
be using in the network connection of the Control Panel.
Chapter 7. Recovering the Computer
7-19