Table of Contents
Advertisement
Q3 In DOS mode, changing the full screen DOS mode by pressing
<ALT>+<Enter> key displays a broken image for a short period.
A
The DOS mode which supports 2 Byte characters such as Korean and Japanese
runs in graphic not in text mode. In this case, a broken image may be displayed
while changing the video mode settings.
Q4 In the following cases, the screen blinks or displays noise for a short time
(Click the Graphics Related tab, Change Resolution, Change Display
Device, Remove the AC Adapter, Restart the System)
A
This may happen while the video driver is examining the connected device.
While detecting, any connected display devices may blink or some noise may
occur.
Q5 When I connect a projector, and change the setting to display screen image
on both the LCD and the projector by pressing <Fn>+<F4/
is not displayed properly.
A
Press <Fn>+<F4/
If the same problem continues, it means the projector cannot support the resolu-
tion. Lower the resolution to 1024 x 768.
Q6 The playback screen of a DVD title or an MPEG file is only displayed on the
LCD.
A
Video is displayed on a single display device by default, when both LCD and
CRT are selected simultaneously.
1. Right-click over the Desktop and select Properties from the pop-up menu.
2. In the [Display Properties] window, select the Settings tab > Advanced >
CATALYST Control Center tab.
3. Click the ATI CATALYST Control Center button and run the CATALYST
Control Center.
4. From the View menu, select the Advanced View item.
5. Select Avivo Video > Theater Mode and set the Clone Mode Overlay Dis-
play item to Theater Mode (Full Screen). You can then view the video on both
LCD and CRT.
120 Users Manual
> keys once again.
> keys, screen
Advertisement
Table of Contents
