Table of Contents
Advertisement
Activating the Booting Password
Before activating the booting password, the supervisor password must have
been configured.
Set the Password on boot option to [Enabled].
From now on, system booting will not proceed without the password.
Setting up a Hard Disk Drive Password
A supervisor password must be set using the Set Supervisor Password menu.
If you set a password for a hard disk drive, it cannot be accessed from another comput-
er.
Press Enter in the 'Set HDD 0 Password' item and define a password as described in
Step 3 of the Setting up the Supervisor Password.
Deactivating the Password
1. On the password to delete, press <Enter>. (e.g. supervisor password)
2. Enter the current configured password, and press <Enter>.
3. Leave the 'Enter New Password' and 'Confirm New Password' field empty, and
press <Enter> to deactivate the password.
96 Users Manual
Advertisement
Table of Contents
