Engineering Installation Preparation And Notice; Installation Materials Selection - Gree ULTRA heating GMV5 Multi VRF Series Service Manual

INSTALLATION

1 Engineering Installation Preparation and Notice

1.1 Installation notice
Personnel and property safety are highly concerned during the entire installation process. Installation implementation must abide by
relevant national safety regulations to ensure personnel and property safety.
All personnel involved in the installation must attend safety education courses and pass corresponding safety examinations before
installation. Only qualified personnel can attend the installation. Relevant personnel must be held responsible for any violation of the
regulation.
1.2 Installation key points and importance
VRF air conditioning systems use refrigerant, instead of other agent, to directly evaporate to carry out the system heat. High level
of pipe cleanness and dryness is required in the system. Since various pipes need to be prepared and laid out onsite, carelessness or
maloperation during installation may leave impurities, water, or dust inside refrigerant pipes. If the design fails to meet the requirement,
various problems may occur in the system or even lead to system breakdown.
Problems that usually occur during installation are as follows:
No. Installation Problem
Dust or impurities enter into the
1
refrigeration system.
2
welding.
The vacuum degree in the refrigerant pipe The refrigeration performance is reduced. The system fails to keep normal operation
3
4
Water enters into the refrigeration system.
5
6 Refrigerant pipe is blocked.
7
Refrigerant pipe exceeds the limit.
8
9 The refrigerant pipe leaks.
10 Water drainage from the condensate water
pipe is not smooth.
The ratio of slop for condensate water pipe
11
is incorrectly connected.
12
13 The guide vane of air channel is not
reasonably manufactured.
Possible Consequence
Pipes are more likely to be blocked; air conditioning performance is reduced;
compressor wear is increased or even hinder the normal operation of the system and
Pipes are more likely to be blocked; air conditioning performance is reduced;
compressor wear is increased or even hinder the normal operation of the system and
due to frequent protection measures. When the problem getting serious, compressor
and other major components can be damaged.
with abnormal noise generated; failures may occur in the system due to ice plug.
materials and can also reduce the cooling performance.
The cooling performance is reduced; in certain cases, it may cause long-term
compressor operating under overheat conditions; the lubricating effect can be
affected and the compressor may be burnt if impurities were mixed with the
harmful for long-term running of the system.
of the air conditioner. Long-term operation under such circumstance may cause an
overheating compressor or even damage the compressor.
Residual water in IDUs can affect the normal operation of the system. The possible
water leakage can damage the IDU's decoration.
Reverse slop or inconsistent connection of condensate water pipe can hinder the
smooth drainage and cause leakage of the IDU.
The air channel will deform; vibration and noise occur during unit operating.
Uneven air quantity allocation reduces the overall performance of the air conditioner.
Ultra Heating GMV5 Multi VRF
burn the compressor.
burn the compressor.
lubricating oil.
to the compressor.
for North America
37