Gree ULTRA heating GMV5 Multi VRF Series Service Manual page 19

Button Graphics
2.2 Installation and removal
2.2.1 Installation dimensions
mm 112
inch 4.41
2.2.2 Installation method
Above is a simple installation method of wired controller. Please pay attention to the following:
1) Before installation, disconnect power of the indoor unit. Do not operate when power is connected.
2) 2-core twisted pair cable from the installation hole on the wall and lead it through the hole
3) Place the wired controller on wall and secure its back plate on wall with screw M4X25.
4) Connect the 2-core twisted pair cable to terminal H1 and terminal H2. Tighten up the screws.
5) Stick the cable in the slot that is left of the terminals and buckle the wired controller's panel with its back plate.
point 5, strip some of the sheath of the communication cable to meet the installation requirement.
Fig. 1.3 Button graphics
112 22
Fig.2.1.1 Dimension of wired controller
22 2.7
0.87 0.11
1 2
H1 H 2
H1 H 2
7 6
8
Fig. 2.2.2 Installation diagram for wired controller
3
5
22
42.5 Unit:mm
3.3 5
0.13 0.20
3
H1 H 2
9
Ultra Heating GMV5 Multi VRF
for North America
42.5 40 82.5
1.67 1.57 3.25
4
5
10
on the back plate of wired controller.
Unit:mm
17
CONTROL