Using the Multi-Bays in the Docking Station
Your computer includes the docking station that holds a 5.25" and a 3.5" device in the
two multi-bays. Below is a listing of the device types you may install in your docking
station.
The default system is purchased with CD/DVD-ROM and FDD devices.
5.25" Devices:
3.50" Devices:
Changing Devices
This section will discuss changing the 5.25" and 3.5" devices.
The multi-bay is the portion of the docking station where you change devices. See Figure
5 on page 6.
Changing a 5.25" Device
To change from one 5.25" device to another simply follow the steps below (Figure 27).
1. Turn off the system.
2. Detach the system from the docking station.
3. Slide the 5.25" multi-bay latch toward the middle of the multi-bay.
4. The device will pop out approximately 2cm.
CD-ROM drive
Zip (250Mb) drive
5.25" Device
Figure 27. Changing 5.25" Device
DVD-ROM drive
CD-RW drive
2nd HDD pack
FDD
Using the Multi-Bays in the Docking Station 33