Connecting to the Internet
This section explains how to connect you to the internet. For program details on how
to establish the connection contact the Internet Service Provider [ISP] or system
administrator [SysAdmin].
Installing a Modem Cable
Before you can obtain information on the Internet or send e-mail you must verify the
modem drivers are installed and connect the modem cable, See "Using the Modem"
on page 28.
To connect the modem cable. follow the steps below:
1. Open the modem cable door located in the back left portion of the computer.
2. Plug the modem cable into the Modem port.
3. Contact your Internet Service Provider to obtain information required to make the
connection in your area.
4. After the cable is connected create a "Dialup" connection by clicking Start >
Settings > Dial-Up Networking.
5. Double-Click
6. Follow the instructions in provided in the Make New Connection wizard.
Figure 23. Modem Cable Installation
icon to pop up the connection wizard.
Connecting to the Internet 27