Table of Contents
Advertisement
ATX4
ATZ
AT&F
AT&V
AT&W
AT&Zn=x
AT+MS=X
84 Users Manual
Dials after dial tone is detected
Initializes modem
Loads the factory default configuration (profile)
Shows current configuration
Saves user profile
Stores the dial string in modem memory (n=0~3, x=phone number)
e.g.) AT&Z0=1235678
Automatically calls the stored phone number by using the following
command.
ATDTS0Recalls the stored phone number as AT&Z0 by tone dial
ATDPS0Recalls the stored phone number as AT&Z0 by pulse dial
Sets protocol for modem connection
(X=V90, V34)
AT+MS=V90 (default setting)
Try to connect with V.90 (max 56 Kbps)
AT+MS=V34
Try to connect with V.34 (max 33.6 Kbps)
Advertisement
Table of Contents
