Cd-Rom Drive - Samsung N640 User Manual

Figure 22. Setting the switch on 2nd HDD

CD-ROM Drive

If your system did not ship with a CD-ROM drive included, you can order a drive.
See "Using the CD-ROM Drive" on page 27 for directions on installing the CD-
ROM drive.
To install and use the CD-ROM drive in the Flex-Bay, you must set the switch on
a device to set it as slave type of IDE bus. Set switch 1 to ON and switch 2 to ON.
See "Using the Flex-Bay" on page 23 for information on installing a device in the
Flex-Bay.
Figure 23. Setting the switch on CD-ROM drive
Using Options 89