Using System Setup; Starting System Setup - Samsung N640 User Manual

Using System Setup

The System Setup program enables you to configure your computer hardware and
set security and power-savings options. The settings you choose are stored in
battery-maintained CMOS memory that saves the information even when the
computer's power is turned off. When your computer is turned back on, it is
configured with the values found in this memory.
Run System Setup if you get a message prompting you to run the program. You
may also want to run System Setup, particularly the first time you use your
computer, to set the time and date, use security or power-management features, or
alter the settings of other features.
You can use the configuration listing at the back of this manual to record
information specific to your computer. (See "Recording the Computer Hardware
Configuration" on page 109.) Fill it out as you complete your System Setup
configuration. This list helps you describe your computer if you must contact your
authorised reseller for service or product information.

Starting System Setup

To start System Setup, turn on your computer and then press <F2> when
prompted. The System Setup screen appears.
The top of the System Setup screen has a menu bar with the selections listed in
Table 7.
Menu
Main
Advanced
Your computer's version of System Setup may not include all
the fields listed here or may include additional fields. Field
names and order of appearance can vary according to the
version of the BIOS (basic input/output system) on your
computer.
Table 7. System Setup Menus
Function
Changes the basic system configuration.
Configures advanced features on your
computer.
Using System Setup 49