Dvd-Rom Drive Module; Zip Drive; Superdisk Ls-120 Drive - Samsung N640 User Manual

DVD-ROM Drive Module

If your system did not ship with a DVD-ROM drive included, you can order a
drive. The DVD-ROM drive module can be inserted into your computer exactly as
you would insert a CD-ROM. See "Using the CD-ROM Drive" on page 27 for
directions on installing and using the CD-ROM drive. There is MPEG-2 software
included with the drive that will enable you to play DVD movies from the DVD-
ROM drive.
To install and use the DVD-ROM drive in the Flex-Bay, you must set the switch
on a device to set it as slave type of IDE bus. Set switch 1 to ON and switch 2 to
ON. See "Using the Flex-Bay" on page 23 for information on installing a device
in the Flex-Bay.

ZIP Drive

The ZIP drive enables you to store 100 MB of data on a ZIP-100 diskette. The ZIP
drive fits in the Flex-Bay, see "Using the Flex-Bay" on page 23. There is IOmega
ZIP
To install and use the ZIP drive in the Flex-Bay, you must set the switch on a
device to set it as slave type of IDE bus. Set switch 1 to ON and switch 2 to OFF.
See "Using the Flex-Bay" on page 23 for information on installing a device in the
Flex-Bay.

Superdisk LS-120 Drive

The LS-120 drive enables you to store 120 MB of data on a single, 3.5-inch LS-
120 diskette. It is backward compatible with standard HD 1.44MB 3.5-inch
diskettes and it can read and write to them up to three times faster.
To install and use the LS-120 drive in the Flex-Bay, you must set the switch on a
device to set it as slave type of IDE bus. Set switch 1 to ON and switch 2 to OFF.
See "Using the Flex-Bay" on page 23 for information on installing a device in the
Flex-Bay.
90 Using Options