Table of Contents
Advertisement
ACCESSORIES
MORTISING CHISELS AND BITS
Machined steel chisels have 5/8" shanks. Drill bits
have brad points, single cutting edge and up-spiral
flutes for rapid chip removal. Both chisel and bits
require final sharpening before use.
29-914 1/4" Mortising Chisel & Bit
29-915 5/16" Mortising Chisel & Bit
29-913 3/8" Mortising Chisel & Bit
29-912 1/2" Mortising Chisel & Bit
NOTES
Use this section to record maintenance, service and any calls to Technical Support:
18
Advertisement
Table of Contents
