Autronica AutroGuard V-430 Technical Handbook
  1. Manuals
  2. Brands
  3. Autronica Manuals
  4. Security Sensors
  5. AutroGuard V-430
  6. Technical handbook

Autronica AutroGuard V-430 Technical Handbook

Multicriteria protector series
Hide thumbs
Table of Contents

Advertisement

Quick Links

utronica Fire And Security AS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AutroGuard V-430 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Autronica AutroGuard V-430

Summary of Contents for Autronica AutroGuard V-430

  • Page 1 utronica Fire And Security AS...
  • Page 2 This publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Autronica Fire and Security AS and its subsidiaries assume no responsibility for any errors that may appear in the publication, or for damages arising from the information in it.

  • Page 3: Table Of Contents

    3.7.3 Protector without Visual Alarm Device (VAD) ......21 3.7.4 Protector for Retrofit Mounting onto BWA-100/BWA-101 (Height) ................... 21 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security...
  • Page 4 8.3.1 Smoke Detection ..............42 8.3.2 Heat Detection ................ 43 Current Consumption on Detection Loop .......... 44 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, Revision AutroGuard-Technical-Handbook, Doc-1004339, 1, 2020-06-29, Autronica Fire and Security AS Page 2...
  • Page 5 10.6.7 Visual Alarm Device (VAD) ............. 77 10.6.8 Sound Pressure Level - Sounders .......... 79 10.7 Matching Protectors/Bases with AutroSafe Configurations ....80 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security...
  • Page 6 12.10 Test Gas .................... 89 12.11 Testfire / Solo 365 Test Tool ............. 90 13. Index ................. 91 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, Revision AutroGuard-Technical-Handbook, Doc-1004339, 1, 2020-06-29, Autronica Fire and Security AS Page 4...

  • Page 7: Introduction

    Doc-1004281 1.5 Downloading Technical Documents All relevant technical documents can be downloaded from the Autronica product web at www.product.autronicafire.com/products Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security...

  • Page 8: Technical Terms And Abbreviations

    Bajonet ring Rotatable bajonet ring on the protector head used to easily connect the protector to the base. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 2...

  • Page 9: Document Revision Log

    1.7 Document Revision Log Revision Date Description Revision 1 2020-06-29 Officially approved by Autronica Fire and Security AS Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 3...

  • Page 10: Safety

    DISCLAIMERS, LIMITATIONS OF LIABILITY PRODUCT WARNINGS THESE PRODUCTS ARE INTENDED FOR SALE TO, AND INSTALLATION BY, AN EXPERIENCED PROFESSIONAL. AUTRONICA FIRE AND SECURITY CANNOT PROVIDE ANY ASSURANCE THAT ANY PERSON OR ENTITY BUYING ITS PRODUCTS, INCLUDING ANY “AUTHORIZED DEALER”, IS PROPERLY TRAINED OR EXPERIENCED TO CORRECTLY INSTALL FIRE RELATED PRODUCTS.

  • Page 11: Intended Use

    ADEQUATE WARNING OR PROTECTION FROM, FIRE , SMOKE; OR (III) WILL WORK PROPERLY IN ALL ENVIRONMENTS AND APPLICATIONS. 2.2 Intended Use The protector is intended for use in Autronica fire detection systems and with the environmental conditions described in this handbook . 2.3 Safety Notice...

  • Page 12: Mounting, Installation, Commissioning And Maintenance

    Contact your local Autronica contact or dealer for further information. Autronica Fire and Security AS disclaims all liability or responsibility for any injuries or death, damage, faults, malfunctioning and safety risks that may occur due to the use of a product that has been modified.

  • Page 13: Environment Compatibility

    Make sure to comply with all local and currently applicable laws and regulations. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 7...

  • Page 14: Protector Overview

    Autronica provides also several different variants of protectors specifically intended for retrofit purposes. These protectors can easily be mounted onto an existing AutroSafe base (BWA-100/BWA-101).

  • Page 15: Series / Variants

    Protector Overview 3.2 Series / Variants 3.2.1 Protector Variants Without Integrated Alarm Devices Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 9...

  • Page 16: Protector Variants With Integrated Alarm Devices

    Protector Overview 3.2.2 Protector Variants With Integrated Alarm Devices Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 10...

  • Page 17: Details For Ordering

    Protector Overview 3.3 Details for Ordering For information about part numbers for AutroGuard® variants, please visit the Autronica product portal at http://product.autronicafire.com. Use the type configuration matrixes in the following chapters when ordering a variant of the V-430 or V-530 series.

  • Page 18: Ordering Information V-530

    *SIL2 approval is not available for sounder and VAD functions, only for the detection part. ** The extra high sensitivity feature is only available with EXIA and EXIC protectors. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 12...

  • Page 19: Ordering Information V-100

    Telescope removal tool 116-WBJ-5/07 Test gas 116-WBJ-10 Testifire smoke and heat sensor test tool 116-100000927 Detector cover Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 13...

  • Page 20: Labeling

    IECEX certificate Ex data ATEX/IECEX WARNING CSA Ex cert CSA EX WARNING INMETRO Ex cert INMETRO Ex WARNING Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 14...

  • Page 21: Marking On Protector (Bottom)

    The illustration below shows all available markings. The actual marking on the protector depends on the variant. Drawing no. DOC-1003908 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 15...

  • Page 22: Marking On Protector Base (Inside)

    The illustration below shows all available markings. The actual marking on the protector depends on the variant. Drawing no. DOC-1003909 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 16...

  • Page 23: Marking On Protector Top, Ex Only

    Protector Overview 3.4.3 Marking on Protector Top, EX only Drawing no. DOC-1003788 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 17...

  • Page 24: Qr Code And Data Matrix Code

    (the QR code shown in the illustration is an example used only for the purpose of indicating the placement of the QR code). Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 18...

  • Page 25: Data Matrix Code Placement On Protector Base's Tagholder

    (covering the data matrix code). The maximum size of the label is 29 x 10 mm (as shown below). Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 19...

  • Page 26: Dimensions And Outlines

    Protector Overview 3.7 Dimensions and Outlines 3.7.1 Protector Base 3.7.2 Protector with Visual Alarm Device (VAD) Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 20...

  • Page 27: Protector Without Visual Alarm Device (Vad)

    3.7.3 Protector without Visual Alarm Device (VAD) 3.7.4 Protector for Retrofit Mounting onto BWA-100/BWA-101 (Height) With VAD Without VAD Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 21...

  • Page 28: Technical Specifications

    Country of origin Norway EN54 approved Heat EN54-5:2017 Optical Smoke EN54-7:2018 Multi sensor EN54-29:2015 Short circuit Isolator (Base) EN54-17:2005 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 22...

  • Page 29: Integrated Sounder

    Whoop BS Fire 800 - 970 Hz 800-970 tone DIN tone DIN33404- 1200 - 500 Hz 1200-500 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 23...

  • Page 30: Sound Pressure Levels For Tones

    DIN tone 3600-1800 Hz (DIN33404-3) 4.4 Sound Pressure Levels for Tones Measurement angles Vertical plane Horizontal plane Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 24...
  • Page 31 83.44 83.54 83.54 78.44 79.44 80.44 80.44 77.34 78.14 72.74 72.74 81.44 82.24 74.74 74.84 81.64 82.54 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 25...
  • Page 32 82.44 68.94 68.94 78.94 79.04 71.24 71.04 -0.2 72.34 72.24 -0.1 73.94 73.94 73.14 73.14 74.44 74.44 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 26...
  • Page 33 74.74 81.54 81.74 69.94 70.84 77.44 77.54 73.14 73.74 69.54 69.84 72.84 73.54 72.94 73.04 74.64 75.64 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 27...

  • Page 34: Integrated Vad

    12 m at 3 m height. For a white (specified at 2,5m height) VAD, high intensity is to be configured. *Available for V-430 only. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 28...

  • Page 35: Functional Description

    Smoke detection transmitter Two forward-scattering LEDs Smoke detection One IR, one orange. receiver Smoke detection transmitter One IR backward-scattering Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 29...

  • Page 36: Dyfi 3D

    Black smoke flaming fires Smouldering fires Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 30...

  • Page 37: Dyfi - Dynamic Filtering

    The pollution filter maintains the chosen sensitivity throughout the protector’s entire lifetime, even with a polluted protector. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 31...

  • Page 38: Sensitivity Classes For Environmental Adaptivity

    Smoke only Optical detection only For information on the configuration of Operation Classes, refer to chapter 10.6.5. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 32...

  • Page 39: Heat Response Categories

    *** Applies to Operation Class Heat only. For information on the configuration of Heat Response Categories, refer to chapter 10.6.4. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 33...

  • Page 40: Selfverify® 2.0 Function

    Functional Description 5.7 SelfVerify® 2.0 Function As an add-on feature, Autronica provides the SelfVerify® 2.0 system function. The function is performed automatically every 24 hours, and is a calibrated self-test of the sensor elements verifying that the sensitivity of the protector is within the approved range. In addition to the daily system test, SelfVerify®...

  • Page 41: Protector "Alive Signal

     4 times every five seconds for smoke/heat/CO detector (Yellow LED is not yet supported). Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 35...

  • Page 42: Visual Alarm Device (Vad)

    AutroGuard® protector’s VAD:  C, ceiling mounted devices  O, open class devices Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 36...

  • Page 43: Category C - Ceiling Mounted Devices

    To convert the coverage diameter y to the width of a square room: Width of square room = / 1.414 m Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 37...

  • Page 44: Category O

    Visual Alarm Device (VAD) 6.4 Category O Category O (Open Category) is Autronica’s specified coverage volume for 2,5m mounting heights. Category O has lower power consumption than category C (refer to table in Technical Specifications, chapter 4.5). The maximum number of VADs depends on the total load on the loop.

  • Page 45: Vad Intensity - White Vad And Red Vad

    Red Visual Alarm Device Flash Rate 0.5 Hz 1 Hz High C-3-8 Low C-3-5 O-2.5-4 Refer to Configuration, chapter 10.6.7. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 39...

  • Page 46: Audible Alarm Devices

    (for example, maritime general emergency signal, 7 short, 1 long). Refer to Configuration, chapter 10. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 40...

  • Page 47: Planning

    Security products must follow the instructions in this handbook and other applicable handbooks or standards in order to ensure safe operation of the products and services. Autronica Fire and Security is not responsible for ensuring that the products are installed according to national/local regulations. 8.2 Enviromental Requirements 8.2.1 Location / Required Space...

  • Page 48: Area Coverage And Monitoring Distance

    80 m 7,5 meters meters +6 – 12 100 m 9 meters meters Over 12 See NS-3960:2013 meters Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 42...

  • Page 49: Heat Detection

    Ceiling height Area of Monitoring coverage distance Under 6 20 m 3,5 meters meters Over 6 Not permitted meters Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 43...

  • Page 50: Current Consumption On Detection Loop

    Base + protector head Alarm (Red LED indicator ON) 2,1mA Base + protector head Fault (Yellow LED indicator ON) 2,8mA Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 44...

  • Page 51: Mounting Instructions

    (See Template for Marking and Drilling Holes, chapter 9.2.2). Location of Visual Alarm Device Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 45...

  • Page 52: Cable Entries/Knockout Stampings For Surface-Mounted Wiring

    (two 9x12mm and two 9x20mm entries). 9 mm 9 mm Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 46...

  • Page 53: Mounting The Protector Base

    (See Template for Marking and Drilling Holes, chapter 9.2.2). Location of Visual Alarm Device Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 47...

  • Page 54: Template For Marking And Drilling Holes

    For installation purposes, only use the 1:1 template printed on the protector base’s packaging box. Location of cable entry in base Alternative mounting Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 48...

  • Page 55: Mounting For Concealed Conduit Wiring

     Feed the cables through the Ø25 mm cable entry as shown  Mount the protector base to the ceiling by fastening the screws Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 49...

  • Page 56: Mounting Onto A Ceiling Box / Wall Box

     Feed the cables through the Ø25 mm cable entry as shown  Mount the protector base onto the box by fastening the screws Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 50...

  • Page 57: Mounting Onto A Conduit Box

     Feed the cables through the chosen cable entries  Mount the protector base onto the conduit box by fastening the screws Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 51...

  • Page 58: Mounting For Surface-Mounted Wiring

     Feed the cables through the cable entries as shown (the illustrations show two different cable layout alternatives) Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 52...

  • Page 59: Connecting Loop Cables

    (red/black) is used as a reference only. The colors may be different and will vary depending on the installation, applicable standards or local regulations. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 53...

  • Page 60: Wire Routing Arrangement Inside Protector Base

    (the arrows point to the cable holders). Cable holder Cable holder Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 54...

  • Page 61: Wire Insulation Stripping

    Measure the length from the edge of the connector to the strip mark indicated on the drawing  Use a wire stripping tool to strip the cable Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 55...

  • Page 62: Spring Cage Connection

    Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 56...

  • Page 63: Connections - Overview

    The connection of the loop cables is shown below. In the example below, the cables are fed through cable entries/exits used for surface-mounted cabling. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 57...

  • Page 64: Led Connection

    EN54, the absolute maximum number of protectors on a branch-off (or an open loop) is 32. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 58...
  • Page 65 Therefore, always mark the main loop cables and branch-off cables accordingly to ensure correct connections. Branch-off Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 59...

  • Page 66: Alignment Marks On The Protector

    9.4 Alignment Marks on the Protector Before mounting the protector onto the base, observe the alignment marks on the protector shown in the illustration below (Autronica can provide a video showing the mounting of the protector on the protector base).

  • Page 67: Mounting The Protector Onto The Base

    6. Turn the protector clockwise until it is properly fastened (a click will be heard), and make sure that the alignment marks are aligned as shown Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 61...

  • Page 68: Locking/Unlocking The Protector To The Base

    In this case, the locking tool is inserted into the small slot, and the bayonet ring is turned counter-clockwise until it is unlocked. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 62...

  • Page 69: Removing The Protector From The Base

    9.8 Retrofit mounting onto Existing AutroSafe Base BWA-100/BWA-101 Autronica provides several different variants of protectors specifically intended for retrofit purposes (AutroGuard® Retro). These protectors can easily be mounted onto an existing AutroSafe base (BWA-100/BWA-101) similar to chapter 9.5. For dimensions, see chapter 3.7.4.

  • Page 70: Labeling The Protector Base / Tag Holder

    The protector cover must be removed before use; as soon as construction work is completed, or before the fire detection loop is in operation. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 64...

  • Page 71: Configuration

    10.2 Configuration - AutroSafe The configuration requires the use of AutroSafe Configuration Tool, version 4.10 or higher. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 65...

  • Page 72: Site Configuration System Settings

    - Blink AutroGuard V Series Detector on alarm - Enable AutroGuard V Series Detector LED alive blink  Click OK when completed Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 66...

  • Page 73: Sound And Pulse Patterns

    Select the tone from the list, then click OK Refer to chapter 7.3 Sound and Pulse Patterns. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 67...

  • Page 74: Adding System Units

    Select the number of units to be added (for example, 10 units)  Check Auto numbering to automatically number each unit Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 68...
  • Page 75 Continue adding units as described above The example below shows a configuration with several variants of AutroGuard Protectors. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 69...

  • Page 76: Autroguard Default Settings

    Refer to chapter 5.4 Operation Class, 5.5 Sensitivity, 5.6 Heat Response Categories, 5.8 Cover Detection and 11.3.3 Automatic Test Mode. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 70...

  • Page 77: Multi

    From the dropdown lists, select the default properties, then click 10.5.3 Ex  From the dropdown lists, select the default properties, then click Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 71...

  • Page 78: Ex/S

    From the dropdown list, select the default sound pressure level and if the tones are to be mutable Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 72...

  • Page 79: Visual Alarm Device (Vad)

    Type freely selected default postfixes for each sub-unit (these will be added as a postfix to each sub-unit), then click OK Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 73...

  • Page 80: Autroguard Individual Settings

    To enable automatic test mode for a protector, check the checkbox Automatic Test Mode Refer to chapte 11.3.3 Automatic Test Mode. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 74...

  • Page 81: Cover Detection Sensitivity

    Click the dropdown button and select the Heat Reponse Category Refer to chapter 5.6 Heat Response Categories, 5.8 Cover Detection. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 75...

  • Page 82: Operation Classes

     Click the dropdown button for Sensitivity and select the relevant Sensitivity Refer to chapter 5.5 Sensitivity. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 76...

  • Page 83: Visual Alarm Device (Vad)

    Click the dropdown button for VAD Flash Rate to select the relevant flash rate (1/2 Hz or 1Hz). Refer to chapter 6.6 Flash Rate. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 77...
  • Page 84 Click the dropdown button for VAD Intensity to select one of the following intensities: Refer to chapter 6.5 VAD Intensity. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 78...

  • Page 85: Sound Pressure Level - Sounders

    Click the dropdown button for Sound Pressure Level and select High or Low Refer to chapter 4.4 Sound Pressure Levels. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 79...

  • Page 86: Matching Protectors/Bases With Autrosafe Configurations

    The basic and critical safety functions will always be maintained. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 80...

  • Page 87: Testing And Maintenance

    For information on the SelfVerify® 2.0 function, refer to chapter 5.7. Due to the fact that the SelfVerify® 2.0 test is using a calibrated test signal, Autronica Fire and Security considers this to be equal or better than a non-calibrated manual physical test with smoke or test gas.

  • Page 88: Manual Testing

    Testing and Maintenance 11.3 Manual Testing 11.3.1 Introduction Autronica Fire and Security recommends that functional tests of the protector are done automatically by the system itself using the SelfVerify® 2.0 function (refer to chapter 11.1). However, if local regulations require manual testing, a manual test procedure must be carried out.

  • Page 89: Cleaning Procedure

    Such fault messages can simply be accepted without any further actions. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 83...

  • Page 90: Accessories

    The illustrations below show the QR codes on the protector base and the protector, respectively. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 84...

  • Page 91: Was-2000 And As2000 Loop Diagnostic Tool

    WAS-2000. For further information on connections and operation, refer to the User Guide for the Loop Diagnostic Tool on the Autronica product web at www.product.autronicafire.com/products. Part number 116-WAS-2000.

  • Page 92: Air Duct Sampling Unit

    All AutroGuard® protectors can be mounted in an air duct sampling unit to detect smoke in ventilation ducts. Part number Description 116-100001215 Air duct sampling unit for AutroGuard® protectors Autronica delivers the following pipe kits in different lengths: Part number Description 116-BJ-358/100 Pipekit L=100 116-BJ-358/150 Pipekit L=150...

  • Page 93: Air Duct Sampling Unit - Stainless Steel

    Part number Description 116-100001248 Air duct sampling unit (stainless steel) for AutroGuard® protectors Autronica delivers the following pipe kits in different lengths: Part number Description 116-BJ-358/100 Pipekit L =100mm 116-BJ-358/150 Pipekit L =150mm...

  • Page 94: Conduit Box

    55. Part Number Description 116-100001180 Conduit box AutroGuard 20mm 116-100001181 Conduit box AutroGuard 25mm Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 88...

  • Page 95: Telescope Removal Tool

    12.10 Test Gas If the use of test gas is required according to local regulations, Autronica Fire and Security recommends the use of smoke test aerosol Solo A10, 150 ml, part number 116-WBJ-5/07. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120,...

  • Page 96: Testfire / Solo 365 Test Tool

    12.11 Testfire / Solo 365 Test Tool For information on test equipment and instructions, refer to Testifier®’s webpage www.detectortesters.com Part number 116-WBJ-10. Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 90...

  • Page 97: Index

    Mounting onto a Conduit Box · 51 Mounting the Detector Base · 47 Mounting the Detector on the base · 61 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 91...
  • Page 98 SelfVerify® 2.0 Function · 81 Wire Routing Arrangement Inside Detector Base · 54 Sensitivity Classes · 32 Technical Handbook, AutroGuard Multicriteria Protector Series V-430, V-530, V-100, V110 and V-120, AutroGuard-Technical-Handbook, Doc-1004339, Revision 1, 2020-06-29, Autronica Fire and Security Page 92...

This manual is also suitable for:

Autroguard v-530Autroguard v-100Autroguard v110Autroguard v-120116-v-100116-v-100-bk ... Show all

Table of Contents

Save PDF