Fm Radio Operation (Fm) - Silvercrest SBDB 5 A1 Operating Instructions And Safety Instructions

Station information
In DAB+ radio mode, you can show additional station information on the
display
1
♦ Briefly press the INFO / MENU button
following channel information:
–
Programme type (Pty)
–
Group name
–
Time/date
–
Multiplex number/frequency
–
Audio bitrate (kbps)
–
Signal strength (bar)
–
Signal error
–
Scrolling text (radio text)
Deleting stations from the station list
You can remove outdated DAB+ radio stations from the station list if, for example,
you are using the radio at a different location where stations from the previous
station list can no longer be received:
♦ In DAB+ radio mode, press the INFO / MENU button
seconds to enter the setup menu .
♦ Press the TUNE+
System .
♦ Press the
♦ Press the TUNE+
♦ Press the
display
♦ Press the
Stations that are no longer current are removed from the station list .

FM radio operation (FM)

Automatic station scan with station storage (AMS)
The automatic station scan with station saving scans the entire frequency band
once and automatically saves the FM radio stations found as an FM station list .
♦ This appliance must be switched on . If necessary, briefly press the
button
♦ If necessary, briefly press the SOURCE /
radio mode FM and the MHz frequency display is shown on the display
SBDB 5 A1
:
or TUNE− button
9
ENTER / SCAN button
or TUNE− button
9
ENTER / SCAN button
shows the query Prune? .
1
ENTER / SCAN button
to switch on the device .
2
repeatedly to display the
0
for about 2
0
until the display
8 1
to confirm the selection .
3
until the display
8 1
to confirm the selection . The
3
again to confirm the selection .
3
button several times until
4
GB │ MT
shows
shows Prune .
.
1
│ 51 ■