Advertisement
AUDIO SYSTEM
(if equipped)
(AM/FM/XM/MP3/CD Changer Audio System Shown)
B
F
A
SETTING PrESET MEMOrY BUTTONS
(AM/FM Or XM
)
®
1.
Turn radio on by pressing the
PWR button
.
A
2.
Select AM, FM, or XM radio
.
F
3.
Tune the Audio Control knob
to the
D
desired channel.
4.
Press and hold any preset button
E
(1-6) until an audible beep is heard to
memorize the current channel.
NOTE: FM has 2 bands for up to 12 presets.
XM has 3 bands for up to 18 presets.
TUNING AND LISTENING TO XM CHANNELS
1.
Press the XM button
.
G
2.
Select an XM channel by turning the
Audio Control knob
to scroll through the
D
XM channels.
3.
Press the Audio Control knob
to select
D
the desired XM channel.
CATEGOrY SEArCH (XM)
1.
While in XM mode, press the DIR p
or CAT q button
to scroll through
C
music categories.
2.
Press the Audio Control knob
to select
D
the desired category.
NOTES:
• Please refer to your Owner's Manual for more detailed information on how to use your audio system.
• A clear view of the southern sky is recommended to ensure good XM radio reception if service is available in your area.
Trial XM subscription ends 3 months following the vehicle date of sale. Please contact XM Radio at 1-800-XM-RADIO
(1-800-967-2346) to renew your XM subscription. For more XM Radio information call 1-800-XM-RADIO
(1-800-967-2346) or online at XMRadio.com.
8
G
H
I
E
SEEkING NEXT AvAILABLE CHANNEL
(AM/FM Or XM)
Press the SEEK
or TRACK
button
seek the next available channel.
SCANNING THrOUGH AUDIO CHANNELS
(AM/FM, XM, Or CD/MP3)
1.
Press the SCAN button
to preview
I
each channel / track.
2.
Press the SCAN button
again to stop
I
the scan feature.
3.
To scan through the channel presets, for
AM/FM/XM only, press and hold the SCAN
button
until an audible beep is heard.
I
ADJUSTING THE EqUALIzEr
(SOUND qUALITY CONTrOL)
1.
Press the Audio Control knob
the following sound qualities:
Equalizer g Bass g Middle g Treble g
Balance g Fader g Current State
2.
Turn the Audio Control knob
D
the sound quality.
DISPLAYING INFOrMATION (XM)
Press the INFO button
to display the
H
following channel information:
Title g Name g Category g Current State
AUTOMATIC CLIMATE CONTrOL
(if equipped)
C
D
• auto temperature –
A
system for automatic heating and cooling.
• temperature control switch –
to
B
to select the degree of heating. Turn to the
left for cooler temperatures, turn to the right
for warmer temperatures.
FrONT DEFrOST SWITCH –
B
activate / deactivate to clear the windshield
of fog and / or thin ice.
DISPLAY WINDOW
C
rEAr WINDOW DEFrOST SWITCH –
D
to activate / deactivate the rear defroster.
• oFF –
Press to turn off the fan.
E
• Blower Fan control switch –
select the blower fan speed.
to select
D
DEFrOSTING DEFOGGING
1.
Set the temperature control
2.
Set the fan speed
to adjust
3.
Press the front windshield defrost control
NOTE:
• On the automatic climate control system, turn the fan speed control to the desired speed
to turn the fan on. Pressing the OFF button turns the fan off.
• If the air conditioner filter for the evaporator blower is not replaced per the scheduled
maintenance section, excessive window fogging may result. This filter is located in the
evaporator housing behind the glove box. Your authorized Hyundai dealer can replace this
filter for you.
• To speed up defogging and dehumidifying, the fresh air mode should be selected.
B
C
PUSH
AUTO
A
MODE
A/C
I
H
G
Push to activate
FrESH AIr SYSTEM SWITCH –
F
to activate / deactivate. In this mode air
Use
enters the vehicle from outside and is
heated or cooled according to the other
functions selected.
AIr INTAkE CONTrOL SWITCH –
G
Press to
to activate / deactivate. In this mode air
from within the passenger compartment
is drawn through the heating system and
is heated or cooled according to the other
functions selected.
Press
AIr CONDITIONING SWITCH –
H
activate / deactivate air conditioning.
MODE SWITCH –
I
Use to
flow of air. Air flow can be directed to
different levels.
to the desired setting.
A
to the highest setting.
E
.
B
D
PUSH
OFF
LO
HI
E
F
Push
Push
Press to
This controls the
9
Advertisement
