Advertisement
TIrE PrESSUrE MONITOrING SYSTEM (TPMS)
LOW TIrE PrESSUrE INDICATOr:
Illuminates if one or more of
your tires is significantly under-inflated. Safely park the vehicle
and check your tires as soon as possible, and inflate them to the
proper pressure.
TPMS MALFUNCTION INDICATOr:
Illuminates and stays
illuminated when there is a malfunction with the TPMS system.
Have the system checked by an authorized Hyundai dealer as
soon as possible.
NOTE: The TPMS is not a substitute for proper tire maintenance,
and it is the driver's responsibility to maintain correct tire
pressure, even if under-inflation has not reached the level to
trigger illumination of the TPMS low tire pressure indicator.
TrIP COMPUTEr Or TrIP ODOMETEr
TrIP COMPUTEr
(if equipped)
With the ignition switch in the ON
position,
press the TRIP switch to change the display:
TRIPMETER
i
DRIVE TIME
i
AVERAGE SPEED
i
AVERAGE FUEL CONSUMPTION
i
DISTANCE TO EMPTY
Push in the RESET switch more than 1 second
to initialize the displayed information such
as tripmeter, average speed, average fuel
consumption and drive time.
TrIP ODOMETEr
(without Trip Computer)
With the ignition switch in the ON position,
press the TRIP switch to toggle between TRIP
A and TRIP B.
To reset the display, press the RESET switch
for 1 second and the individual TRIP A or
TRIP B will reset to 0.
6
CrUISE CONTrOL
To set a cruising speed:
1. ON
CRUISE indicator in the instrument
cluster will illuminate. Accelerate to the
desired cruising speed (above 25 mph).
2. SET
your foot from the accelerator pedal.
To accelerate or decelerate speed:
ACCEL
speed with cruising speed set.
COAST
with cruising speed set.
To cancel the cruising speed:
Press the
brake pedal, depress the clutch pedal,
or turn
TRIP
RESET
–
Pull the switch and the
D
–
Push the switch and remove
C
–
Press to accelerate your
A
–
Press to slow speed down
C
CANCEL
switch, press the
B
OFF
cruise control.
D
F
MIST
OFF
OFF
INT
INT
LO
HI
TIME
S
F
MIST
OFF
INT
INT
LO
HI
TIME
S
A
B
D
C
WINDSHIELD WIPEr / WASHEr
To activate the windshield wipers, move
the wiper / washer switch to one of the
four positions:
MIST –
This feature allows the
windshield wipers to make a single
wipe to clear any mist on the windshield.
Move the windshield wiper / washer
switch upward.
INT –
Intermittent wiper operation is
the first downward position. The wiper
speed may be varied by rotating the
INT TIME switch. F allows less time
between wipes, S allows more time
between wipes.
LO –
Low-speed operation is the second
downward position.
HI –
High-speed operation is the third
downward position.
WIPE / WASH OPErATION
To use the windshield washer, pull the
wiper / washer lever towards you. When
the washer is operated, the wipers
automatically make two passes across
the windshield. The washer continues to
operate until the lever is released.
7
Advertisement
