Vascat MAC-HS Series Operation And Maintenance Manual page 59

OPERATION AND MAINTENANCE MANUAL
MAC-HS MOTORS
PAGE: 59
When a specific original spare is required for a motor from the MAC-HS series, the following information must be provided:
1. Motor type (by default, MAC).
2. Standard (HS).
3. Size (in reference to shaft height).
4. Length (S, M, L, P or X).
These initial 4 points refer to the name of the motor and are summarised in the following table:
MAC HS 200 M
Motor type Series Size Length
Table 28: MAC-HS motor codes
Besides the initial 4 points, the following must also be specified:
5. Motor serial number.
6. Year of manufacture.
All the information can be found on the motor nameplate.
CODE: CTT32 EDITION: 04 RELEASE: SEPTEMBER 2020
Subject to technical changes without prior notice