Advertisement
Advertisement
Table of Contents
Related Manuals for Vascat MAC-HS4 Series
Summary of Contents for Vascat MAC-HS4 Series
- Page 1 OPERATION AND MAINTENANCE MANUAL MAC-HS4 MOTORS...
-
Page 2: Legal Notes And Safety Instructions
1. LEGAL NOTES AND SAFETY INSTRUCTIONS 1.1 Justification VASCAT motors contain low-voltage parts and rotating elements that make them hazardous; they also contain hot surfaces. Users must take notice of all the hazard warning signs described in this manual (see section 1.3). -
Page 3: Hot Surface
OPERATION AND MAINTENANCE MANUAL MAC-HS4 MOTORS PAGE: 6 1.3 Hazards and warning signs The manual contains the information required for personnel safety and the prevention of material damages. All information related to personnel safety is highlighted in general with a warning triangle; however, the hints (to avoid only material damages) are not. - Page 4 Machinery Directive. Commissioning is not allowed until the end product is checked and found to be compliant with said Directive (please see, among others, the EN 60204-1 standard). VASCAT MAC HS4 motors must be used only for the applications provided in the catalogues and the related technical documentation.
- Page 5 The indications that refer to procedures and the connection details provided in the manual must be considered only as proposals and whether or not they are applicable must be studied for each case in particular. VASCAT does not guarantee their appropriateness in any case.
-
Page 6: Declarations Of Conformity
OPERATION AND MAINTENANCE MANUAL MAC-HS4 MOTORS PAGE: 9 2. DECLARATIONS OF CONFORMITY CODE: CTT32 EDITION: 02 RELEASE: SEPTEMBER 2014 Subject to technical changes without prior notice... - Page 7 OPERATION AND MAINTENANCE MANUAL MAC-HS4 MOTORS PAGE: 10 CODE: CTT32 EDITION: 02 RELEASE: SEPTEMBER 2014 Subject to technical changes without prior notice...
-
Page 8: Product Description
PAGE: 11 3. PRODUCT DESCRIPTION VASCAT MAC HS4 motors are asynchronous AC electrical machines with a squirrel-cage rotor, square laminated steel frame and forced cooling. They have been specially designed to operate in high-dynamics applications that require speed variation. They must be powered exclusively by frequency converters. - Page 9 OPERATION AND MAINTENANCE MANUAL MAC-HS4 MOTORS PAGE: 12 3.2 Reference standards The MAC-HS4 motors are designed and manufactured according to the Low Voltage Directive 2006/95/CE and they have been designed for their use in industrial applications as an incomplete machine or as a machine component as provided for in the 2006/46/CE Machinery Directive.
Need help?
Do you have a question about the MAC-HS4 Series and is the answer not in the manual?
Questions and answers