Vascat MAC-HS Series Operation And Maintenance Manual page 41

OPERATION AND MAINTENANCE MANUAL
MAC-HS MOTORS
PAGE: 41
Figure 10: Fitting the coupling
PRECAUTION
Damages to the motor bearings
If the motor shaft is knocked, the bearings may be damaged.
If belts are used for the transmission of the torque or a gear with radial load, make sure that the admissible radial load is not
exceeded on the motor shaft. The specific data for the admissible radial loads for each size of motor can be found in the Table 18
description of the bearings given in previous sections.
CODE: CTT32 EDITION: 04 RELEASE: SEPTEMBER 2020
Subject to technical changes without prior notice