Vascat MAC-HS Series Operation And Maintenance Manual page 51

OPERATION AND MAINTENANCE MANUAL
MAC-HS MOTORS
6- When the motor is stopped, leave the cooling system in operation as long as necessary to bring the windings below
80°C.
PRECAUTION
Damages to the motor bearings
To avoid the premature wear and tear of the grease in the bearings, they must be maintained at a temperature of below 80°C at
all times.
7- In the case of long stops of more than fifteen days, repeat the bearings run-in procedure as described in sections 2
and 3.
CODE: CTT32 EDITION: 04 RELEASE: SEPTEMBER 2020
Subject to technical changes without prior notice
PAGE: 51