Interlogix NS3552-16P-2T-2S Quick Installation Manual page 4

Figure 8: Login Screen
3. After entering the password, the main screen appears as
shown in Figure 9.
Figure 9: Web Main Scree of Industrial Managed Switch
4. The Switch Menu on the left of the Web page lets you
access all the functions and status the Industrial Managed
Switch provides.
Now you can use the Web management interface to continue
the Switch management. Please refer to the user manual for
more.
4 / 4
Note: For security reason, please change and memorize the
new password after this first setup.
8. Resetting the Switch to
Default
To reset the IP address to the default IP Address
"192.168.0.100" and the user password to factory default
mode (default password is admin), press the hardware reset
button on the front panel for about 10 seconds. After the device
is rebooted, you can login the management Web interface
within the same subnet of 192.168.0.xx and default password.
Be noted that all the previous setups will be disappeared after
the factory default reset is made.
Figure 10: NS3552-16P Reset Button.
9. Customer Support
Thank you for purchasing IFS products. You can browse our
online FAQ resource on IFS web site first to check if it could
solve your issue. If you need more support information, please
contact IFS switch support team.
Look under transmission.
IFS online FAQ:
http://www.Interlogix.com/support
Switch support team mail address:
http://www.Interlogix.com/support
P/N 1073222-EN • REV A • ISS 21SEP16