Image Lock; Configuring The Image Lock Settings - Samsung 400BX User Manual

4
Screen Adjustment
4.6

Image Lock

Enhance the picture quality by removing noise (static) such as flickering and shaking.
This option is available when the input source is PC.

4.6.1 Configuring the Image Lock Settings

This product can only be controlled by using the remote control.
1
Press MENU
2
Press /
3
Press /
The following screen will appear.
I m a g e L o c k
Coarse
Remove vertical noise (stripes) on the screen.
If the screen is in a different position after the frequency is adjusted using Coarse, move the
screen to the center by using the
Fine
Remove horizontal noise (stripes) on the screen.
If noise is not completely removed after
noise is minimized and then adjust using
H-Position
Adjust the screen position. The screen can be moved left or right.
V-Position
Adjust the screen position. The screen can be moved up or down.
4
Press /
5
Press /
on the remote control.
to move to Picture and press [
to move to Image Lock and press [
C o a r s e
F i n e
H - P o s i t i o n
V - P o s i t i o n
M o v e E n t e r
H-Position/V-Position
to move to the option you want and press [
to adjust the value and press [
].
].
9 0 1
1 0 0
5 1
7 6
R e t u r n
menu.
Fine adjustment, adjust the frequency using Coarse until
Fine again.
].
]. The change will be applied.
103
4 Screen Adjustment