User Manual 400BX The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. Storage High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby.
Before Using the Product Safety Precautions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.
Do not disconnect the power cord while the product is being used. The product may become damaged by an electric shock. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products.
Page 7
Before Using the Product Keep the plastic packaging out of the reach of children. Children may suffocate. Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) The product may fall and become damaged and/or cause an injury. Using the product in an area with excess vibration may damage the product or cause a fire.
Page 8
SAMSUNG time) may seriously affect its performance. Be sure to consult Samsung Customer Service Center if you want to install the product at such a place. Before Using the Product...
Before Using the Product Cleaning Warning Disconnect the power cord before cleaning. An electric shock or fire may result. Do not spray water directly on the product when cleaning. Do not expose the product to water or get the product wet. A fire, electric shock, or product defect may result.
Damage to the cord may result in a fire or electric shock. If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center. An electric shock or fire may result.
Page 11
Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. Product failure, an electric shock or fire may result. Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
Page 12
Before Using the Product Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. Activate power-saving mode or a moving-picture screen saver if you will not be using the monitor for an extended period of time. Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
Page 13
Before Using the Product Exercise caution when adjusting the product angle or stand height. Your hand or finger may get stuck and injured. Tilting the product at an excessive angle may cause the product to fall and an injury may result. Do not place heavy objects on the product.
Table Of Contents BEFORE USING THE PRODUCT TABLE OF CONTENTS PREPARATIONS Copyright Cleaning Storage Safety Precautions Symbols Electricity and Safety Installation Cleaning Operation Checking the Contents Removing the Packaging Checking the Components Parts Frontal Sensor Reverse Side Anti-theft Lock Remote Control Before Installing the Product (Installation Guide) Tilting Angle and Rotation...
Page 15
Table Of Contents CONNECTING AND USING A SOURCE DEVICE USING MDC SCREEN ADJUSTMENT Before Connecting Pre-connection Checkpoints Connecting and Using a PC Connecting to a PC Driver Installation Changing the Resolution Connecting to a Video Device Connection Using the AV Cable Connection Using the RGB-component Cable Connection Using an HDMI-DVI Cable Connecting to a TV Tuner Box (US Only)
Page 16
Table Of Contents SOUND ADJUSTMENT Color Tone Configuring the Color Tone Settings Color Control Configuring the Color Control Settings Color Temp. Configuring the Color Temp. Settings Image Lock Configuring the Image Lock Settings Auto Adjustment Configuring the Auto Adjustment Settings Signal Balance Configuring the Signal Balance Settings Size...
Page 17
Table Of Contents SETTINGS Custom Configuring the Custom Settings Auto Volume Changing the Auto Volume Setting SRS TS XT Setting SRS TS XT Sound Reset Resetting Sound Settings (Sound Reset) Language Changing the Language Time Clock Set Sleep Timer Timer1 / Timer2 / Timer3 Holiday Management Menu Transparency Changing Menu Transparency...
Page 18
Lamp Schedule OSD Display Setup Reset Resetting Setup (Setup Reset) Reset All Resetting All Settings (Reset All) Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the followings. Q & A General PowerSaver...
Page 19
Table Of Contents APPENDIX INDEX Preset Timing Modes Contact SAMSUNG WORLDWIDE Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality Prevention of Afterimage Burn-in Terminology Correct Disposal - Europe only Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only...
Preparations Checking the Contents 1.1.1 Removing the Packaging Remove the black locking device at the bottom of the box. Using the grooves in the box, lift and remove the top of the box. Check the components and remove the Styrofoam and plastic bag. The appearance of actual components may differ from the image shown.
Preparations 1.1.2 Checking the Components Contact the vendor where you purchased the product if any components are missing. The appearance of the components and items sold separately may differ from the image shown. Components Components may differ in different locations. Quick setup guide Power cord Batteries...
Preparations TV tuner box Parts 1.2.1 Frontal Sensor The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. This product can only be controlled by using the remote control. Sensor Power lamp Remote sensor...
Connects to a source device using the D-SUB or RGB-component cable Be sure to connect the [DC OUT] port to a TV tuner box specified by Samsung. Otherwise, the product performance may be affected. Connects to an MDC using the RS232C cable AV IN...
Preparations 1.2.3 Anti-theft Lock An anti-theft lock allows you to use the product securely even in public places. The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Preparations 1.2.4 Remote Control Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. Remote control button functions may differ for different products. Power on the product. Not enabled on this product.
Page 26
Preparations Adjusting the OSD with the Remote Control MENU To place batteries in the remote control: Open the back lid of the remote control. Place two AAA batteries (1.5V) in the right direction. Close the lid. Batteries are sold separately. Open the OSD menu.
Page 27
Preparations Remote Control Reception Range Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left and right. Store used batteries out of reach of children and recycle. Do not use a new and used battery together. Replace both batteries at the same time. Remove batteries when the remote control is not to be used for an extended period of time.
Otherwise, it may fall and cause personal injury. Make sure to install the specified wall mount. 1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Center for further details. 15 Û The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall Figure 1.1 Side view Minimum 40 mm Ambient temperature: Under 35 C When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient temperature is kept below 35 C.
Page 30
Preparations 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. Figure 1.2 Side view When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C.
After an order has been placed, a technician will visit you to install your VESA bracket. Samsung is not held responsible for any damage to the product or injuries sustained as a result of the product being installed by an unqualified individual.
Page 33
Preparations Components Be sure to use only the components and parts provided with your bracket for installation. Bracket x 1 Hinge x 2 (left and right) Fixing the main unit to the bracket: The appearance of the main unit may differ from the image shown (The assembly and installation of the plastic pieces and screws are the same as the images shown).
Page 34
Preparations Firmly fasten the 4 screws (B) combined with the plastic pieces at step 2 to the back of the main unit. Remove the safety pin (3). Fit the 4 holders on the main unit in the grooves in the bracket, and lower (1) and securely hang the main unit on the bracket (2).
Page 35
Preparations Adjusting the Wall-mounted Product Angle Fix the main unit to the bracket. Adjust the bracket angle to -2 before you fix the bracket on the wall. Hold and pull the top and center of the main unit fixed on the bracket towards you as shown below to adjust the angle.
Preparations 1.5.2 Control Codes Viewing control state (Get control command) Header Command 0xAA Command type Controlling (Set control command) Header Command 0xAA Command type Command Power control Volume control Input source control Screen mode control Screen size control PIP on/off control Auto adjustment control Video wall mode control Safety Lock...
Page 39
Preparations To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control Function A TV/monitor can be powered on and off using a PC. Viewing power state (Get Power ON / OFF Status) Header Command...
Page 40
Preparations Volume control Function The volume of a TV/monitor can be adjusted using a PC. Viewing volume state (Get Volume Status) Header Command 0xAA 0x12 Setting the volume (Set Volume) Header Command 0xAA 0x12 "Volume": Volume value code to be set on a TV/monitor (0-100) Header Comma 0xAA...
Page 41
Preparations Input source control Function The input source of a TV/monitor can be changed using a PC. Viewing input source state (Get Input Source Status) Header Command 0xAA 0x14 Setting the input source (Set Input Source) Header Command 0xAA 0x14 "Input Source": An input source code to be set on a TV/monitor 0x14 0x1E...
Page 42
Preparations Header Comma 0xAA 0xFF "Input Source": An input source code to be set on a TV/monitor Header Comma 0xAA 0xFF "ERR" : A code showing what error has occurred Data length Ack/Nak ‘A’ Data length Ack/Nak ‘N’ r-CMD Val1 Checksu "Input 0x14...
Page 43
Preparations Screen Function The screen mode of a TV/monitor can be changed using a PC. Screen mode cannot be controlled when the This control can only be used on models that include a TV. Viewing screen status (Get Screen Mode Status) Header Command 0xAA...
Page 44
Preparations Screen size control Function The screen size of a TV/monitor can be changed using a PC. Viewing the screen size (Get Screen Size Status) Header Command 0xAA 0x19 Header Comma 0xAA 0xFF "Screen Size": TV/monitor screen size (range: 0 – 255, unit: inch) Header Comma 0xAA...
Page 45
Preparations PIP On/Off control Function The PIP mode of a TV/monitor can be turned on or off using a PC. Only available on models that have the PIP function. The mode cannot be controlled if This function is not available in MagicInfo. Viewing PIP on/off state (Get the PIP ON / OFF Status) Header Command...
Page 46
Preparations Auto adjustment control (PC and BNC only) Function Automatically adjust the PC system screen using a PC. Viewing auto adjustment state (Get Auto Adjustment Status) Setting auto adjustment (Set Auto Adjustment) Header Command 0xAA 0x3D "Auto Adjustment" : 0x00 (at all times) Header Comma 0xAA...
Page 47
Preparations Video Wall Mode Control Function Video Wall Mode can be activated on a TV/monitor using a PC. This control is only available on a TV/monitor whose This function is not available in MagicInfo. Viewing video wall mode (Get Video Wall Mode) Header Command 0xAA...
Page 48
Preparations Safety Lock Function PC can be used to turn the Safety Lock function on or off on a TV/monitor. This control is available regardless of whether or not the power is turned on. Viewing the safety lock state (Get Safety Lock Status) Header Command 0xAA...
Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Computer Camcoder 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.
Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (analogue type) Connect the D-SUB cable to the [RGB/COMPONENT IN] port on the product and the D-SUB port on the PC.
Page 51
Connecting and Using a Source Device Connection using a DVI cable (digital type) Connect a DVI cable to the [DVI IN] port on the monitor and the DVI port on the PC. Connect a sound output cable to the [AUDIO IN] port on the product and the sound output port on the PC.
An installation driver is contained on the CD supplied with the product. If the provided files are faulty, go to the Samsung homepage (http://www.samsung.com/sec) and download the files. Insert the user manual CD provided with the product into the CD-ROM drive.
Connecting and Using a Source Device 2.2.3 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display...
Page 54
Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personal Settings Display Settings, and change the resolution. 2 Connecting and Using a Source Device...
Page 55
Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. 2 Connecting and Using a Source Device...
Connecting and Using a Source Device Connecting to a Video Device You can connect a video device to the product using a cable. Connecting parts may differ in different products. 2.3.1 Connection Using the AV Cable Connect the AV cable to the [AV IN] port on the product and the video port on the video device. Connect the RCA stereo cable to the [AUDIO IN] port on the product and the matching-colored AUDIO OUT ports on the video device.
Connecting and Using a Source Device 2.3.2 Connection Using the RGB-component Cable Connect the RGB-component cable to the [RGB/COMPONENT IN] port on the product and the matching-colored component ports on the video device. Connect the RCA stereo cable to the [AUDIO IN] port on the product and the matching-colored AUDIO OUT ports on the video device.
Connecting and Using a Source Device 2.3.3 Connection Using an HDMI-DVI Cable Connect an HDMI-DVI cable to the [DVI IN] port on the product and the HDMI port on the video device. Connect the RCA stereo cable to the [AUDIO IN] port on the product and the matching-colored AUDIO OUT ports on the video device.
Connecting and Using a Source Device Connecting to a TV Tuner Box (US Only) TV tuner boxes are sold separately. Contact Samsung Customer Service Center for enquiries on the purchase and installation of a TV tuner box. Refer to the quick installation guide provided with your TV tuner box when you connect the tuner box to the product.
Connecting and Using a Source Device Connecting and Using a Source Device 2.5.1 Source List/Edit Name Source List allows you to select a variety of sources and change source device names. Source List You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.
Page 61
Connecting and Using a Source Device Edit Name You can rename a connected source device. Sometimes the screen will not display properly unless the name of a source device is specified in Name. In addition, it is best to rename the source device in To rename a source device in Edit Name: This product can only be controlled by using the remote control.
Page 62
Connecting and Using a Source Device Press to move to the source device you want and press [ source device will be displayed as shown below. E d i t N a m e D V I C o m p o n e n t M o v e Available settings in the (Refer to page 94 for details about the...
Page 63
Connecting and Using a Source Device Source AutoSwitch Settings Turning on the display with active, the display will automatically search the different video input sources for active video. If the display TV source is active (TV tuner connected to the display) the function becomes inactive.
Page 64
Connecting and Using a Source Device Primary Source Specify Primary Source P r i m a r y S o u r c e Press to select the option you want and press [ Secondary Source Specify Secondary Source S e c o n d a r y S o u r c e Press to select the option you want and press [ for the automatic input source.
Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control This product can only be controlled by using the remote control.
Using MDC MDC Program Installation/Uninstallation 3.3.1 Installation Insert the installation CD into the CD-ROM drive. Click the MDC System installation program. If a software installation window is not displayed on the main screen, install with the MDC System execution file under the MDC folder in the CD. Click "Next"...
Using MDC 3.3.2 Uninstallation Select Settings > Control Panel on the Start menu and double-click Add/Delete Program. Select MDC System from the list and click Change/Remove. MDC installation can be affected by the graphics card, mother board and network conditions. 3 Using MDC...
Serial data transmission standard RS-232C is used for communication between a PC and display device. Connect an RS-232C serial cable to the serial ports on the PC and display. 3.4.1 Starting MDC To start the MDC program, click Start>Programs>Samsung>MDC System>MDC System. Menu Bar Remote Control Enable the remote control signal reception function.
Page 69
Using MDC Port Selection Change the port. COM1 - COM2 - COM3 - COM4 The default port is COM1. Lamp Control Change the lamp control mode. User Control Mode - Ambient Brightness Mode Options… Change the number of IDs and the refresh frequency for connected displays. Command Selecting a Connected Display Select Box: Select numbers to set a range.
Using MDC 3.4.2 Configuring Settings for Main Functions System Click "System" to configure preferences. - The System screen is the same as the main screen. Displaying the information about connected displays : Check a checkbox to select a display. ID : View the ID assigned to a connected display. : View the power (ON ( Input : View the input source of a connected display.
Page 71
Using MDC Configuring preferences for a connected display device Power On, Power Off : Power on or off a display. Volume : Control the volume using the volume bar. : Mute or unmute the sound. OSD Display Source OSD : Select whether to display an indicator window when the input source changes. Not Optimum Mode OSD : Select whether to display an indicator window for an unsupported mode.
Page 72
Using MDC Input Source Click "Input Source" to configure preferences. Configuring the input source for a connected display Displayed options differ from PC mode to TV mode. PC mode Select the input source you want for the selected display. S-Video Component MagicInfo HDMI1/HDMI2...
Page 73
Using MDC Changes will only be applied to displays that are powered on. HDMI1, HDMI2, DP, BNC, or S-Video mode may not be available depending on the product. Magicinfo only functions on products that have the MagicInfo function. TV is only enabled on products that have the TV function. Channel adjustment is only available in TV mode.
Page 74
Using MDC When connected in TV, AV, Component, DVI(HDCP) or DTV mode: Click Video Source and change the aspect ratio. You can specify Image Size and Screen Mode. Image Size Auto Wide - 16 : 9 - Wide Zoom - Zoom - Zoom 1 - Zoom 2 - 4 : 3 - Screen Fit - Wide Fit - Custom Screen Mode 16 : 9 - Wide Zoom - Zoom - 4 : 3 Screen Mode can only be adjusted when Image Size is set to Auto Wide in TV mode.
Page 75
Using MDC Time Click "Time" to configure preferences. Clock Set Select a display and change the time. Time is automatically set to the time set on the PC by default. To change the time on displays, change the time set on the PC first. Timer Set Timer1, Timer2, Timer3, and Holiday Management.
Page 76
Using MDC Setting Timer1, Timer2 and Timer3 On Time Automatically turn on the selected display at a specified time. Off Time Automatically turn off the selected display at a specified time. Volume Specify the volume for the display that will turn on by On Time. Source Specify the input source for the display that will turn on by On Time.
Page 77
Using MDC Configuring Preferences for Holiday Management Holiday Management can be used to set the display not to turn on by the Timer on specified dates. Specify the dates. Delete All Delete all the holiday schedules. Add a holiday schedule (dates). Delete a holiday schedule.
Page 78
Using MDC Click "PIP" to configure preferences. Not available on this product. PIP Size OFF - Large - Small - Double 1 - Double 2 - Double 3 Changes to PIP Size will only be applied to the displays that are powered on. Magicinfo only functions on products that have the MagicInfo function.
Page 79
Using MDC PIP Source PC - BNC - DVI - TV - DTV - AV - S-Video - Component - HDMI1 - HDMI2 - DP Changes will only be applied to the displays that are turned on and have PIP mode enabled. Some products may not support HDMI2 mode.
Page 80
Using MDC Settings Click "Settings" to configure preferences. Picture To view the settings for each connected display, select a display one at a time. Selecting all displays by clicking All+Select will display the default values. Changing any setting in this menu will automatically switch the mode to Custom. Picture Change settings for TV, AV, Component and DTV input sources only.
Page 81
Using MDC Color Tone Change the color tone for the selected display. Color Temp Change the color temperature for the selected display. Brightness Sensor Not available on this product. Enable or disable Brightness Sensor for the selected display. Brightness Sensor detects ambient light intensity and automatically adjusts the screen brightness. Dynamic Contrast Change the Dynamic Contrast for the selected display.
Page 82
Using MDC Picture PC To view the settings for each connected display, select a display one at a time. Selecting all displays by clicking All+Select will display the default values. Changing any setting in this menu will automatically switch the mode to Custom. Picture PC Only enabled for the PC, DVI input sources.
Page 83
Using MDC Color Temp Change the color temperature for the selected display. Brightness Sensor Not available on this product. Enable or disable Brightness Sensor for the selected display. Brightness Sensor detects ambient light intensity and automatically adjusts the screen brightness. Dynamic Contrast Change the Dynamic Contrast for the selected display.
Page 84
Using MDC Audio To view the settings for each connected display, select a display one at a time. Selecting all displays by clicking All+Select will display the default values. Changing any setting in this menu will automatically switch the mode to Custom. Audio Change the audio preferences.
Page 85
Using MDC Changes will only be applied to the displays that are powered on. If no display is selected, the factory default values will be displayed. Magicinfo only functions on products that have the MagicInfo function. TV mode is only available on products that have the TV function. Image Lock Image Lock Only enabled for the PC input sources.
Page 86
Using MDC Changes will only be applied to the displays that are turned on. Auto Adjustment will automatically run if the resolution is changed. Magicinfo only functions on products that have the MagicInfo function. TV mode is only available on products that have the TV function. Maintenance Click "Maintenance"...
Page 87
Using MDC Ambient Light Not available on this product. Ambient Light detects ambient light intensity and automatically adjusts the screen brightness. Ambient Brightness Mode should be selected in the Lamp Control menu to use Ambient Light. Enable or disable Ambient Light for the selected display. Changes will only be applied to the displays that are turned on.
Page 88
Using MDC Scroll Pixel Shift Setting Time, Horizontal Dot and Vertical Line will prevent afterimage burn-in by moving the screen slightly at specified intervals. Safety Screen Safety Screen prevents afterimage burn-in when the screen displays a stationary image for an extended period of time.
Page 89
Using MDC Video Wall The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple displays. To start Video Wall, click "Video Wall Control". 3 Using MDC...
Page 90
Using MDC MDC Video Wall On / Off Enable or disable Video Wall. Format Select the format to display the split screen. Full Screen Divider The screen can be divided into a maximum of 100 (Horizontal and Vertical screens multiplied). Natural 3 Using MDC...
Page 91
Using MDC A maximum of 15 displays can be arranged in a row. If the Vertical arrangement is set to 15, a maximum of 6 displays can be assigned to the Horizontal arrangement. If the Horizontal arrangement is set to 15, a maximum of 6 displays can be assigned to the Vertical arrangement.
Using MDC 3.4.3 Troubleshooting Guide Issue The display you want to control does not appear on the system information chart. The display you want to control does not appear on the other Control Info Grids. The following message appears repeatedly. Displays power on or off at different time from one another even though On Time or Off Time is set.
Using MDC 3.4.4 How display properties are shown when multiple displays are used When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 and 3): The settings for ID 1 are displayed before the settings for ID 3.
Screen Adjustment Configure the Picture The layout of the The available options in the Edit Name. (Refer to page 61 for details about To use TV, connect a TV tuner box to the product. Refer to page 59 for details about connecting to a TV. Mode Select a picture mode (Mode) suitable for the environment where the product will be used.
Page 95
Screen Adjustment If the input source is AV, Component or TV: M o d e D y n a m i c S t a n d a r d M o v i e C u s t o m M o v e Dynamic: This mode is suitable when the ambient light is bright.
Screen Adjustment Custom Customize Tint under Picture. Changing any setting under This function is available when Advertisement. (Refer to page 112 and page 94 for details about 4.2.1 Configuring the Custom Settings This product can only be controlled by using the remote control. Press MENU on the remote control.
Page 97
Screen Adjustment Gamma(Natural/Mode1/Mode2/Mode3) Adjust the mid-range brightness (Gamma) of the picture. Natural displays the original picture. displays the screen darker than Mode1. Press to move to the option you want and press [ adjust the value for the selected option. C o n t r a s t M o v e Press...
Page 98
Screen Adjustment If the input source is AV, Component or TV: C u s t o m C o n t r a s t B r i g h t n e s s S h a r p n e s s C o l o r T i n t M o v e...
Screen Adjustment Color Tone Adjust the general color tone of the picture. This function is available when Advertisement. (Refer to page 112 and page 94 for details about Changing any setting under 4.3.1 Configuring the Color Tone Settings This product can only be controlled by using the remote control. Press MENU on the remote control.
Page 100
Screen Adjustment Press to move to the option you want and press [ The selected option will be applied. 4 Screen Adjustment...
Screen Adjustment Color Control Change the color settings for the picture by adjusting the Red, A higher value will increase the intensity of the selected color. This option is available when the input source is This function is not available when Contrast must be set to (Refer to page 94, page 99 and page 112 for details about Mode,...
Screen Adjustment Color Temp. Adjust the color temperature (Red/Green/Blue). (Range: 5000K–15000K) This function is available when set to Advertisement. (Refer to page 94, page 99 and page 112 for details about Mode, 4.5.1 Configuring the Color Temp. Settings This product can only be controlled by using the remote control. Press MENU on the remote control.
Screen Adjustment Image Lock Enhance the picture quality by removing noise (static) such as flickering and shaking. This option is available when the input source is PC. 4.6.1 Configuring the Image Lock Settings This product can only be controlled by using the remote control. Press MENU on the remote control.
Screen Adjustment Auto Adjustment Automatically adjust the Coarse, Fine, This function can be used to automatically detect and remove noise on the screen and correct the screen position. This function will automatically run if the screen resolution is changed. This option is available when the input source is PC. 4.7.1 Configuring the Auto Adjustment Settings This product can only be controlled by using the remote control.
Screen Adjustment Signal Balance This function is used to supplement a weak RGB signal being transmitted through a long cable. This function is available when the input source is Mode is not set to Advertisement (Refer to page 112 and page 94 for details about 4.8.1 Configuring the Signal Balance Settings This product can only be controlled by using the remote control.
Page 106
Screen Adjustment Press to move to the option you want and press [ The following screen will appear. R - G a i n M o v e Specify the RGB (Red/Green/Blue) Gain and Offset values. R-Gain, level of red, green and blue colors in the brighter parts of the screen (range: 0–100). R-Offset, Offset B-Offset adjust the level of red, green and blue colors in the darker parts of the screen...
Screen Adjustment Size Change the picture size. 4.9.1 Changing the Picture Size This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to Different Size options are displayed depending on the current input source: If the input source is PC or DVI: S i z e 1 6 : 9...
Page 108
Screen Adjustment If the input source is AV or Component: S i z e 1 6 : 9 Z o o m 1 Z o o m 2 4 : 3 S c r e e n F i t C u s t o m M o v e 16:9: Display images with an aspect ratio of 16:9.
Screen Adjustment 4.10 Digital NR Improve the picture quality by minimizing noise (static) on the screen. This option is available when the input source is AV, Some resolutions do not support 4.10.1 Enabling Digital NR This product can only be controlled by using the remote control. Press MENU on the remote control.
Screen Adjustment 4.11 HDMI Black Level If you use the product by connecting to a DVD player or set-top box with a DVI cable, the contrast and color may degrade and the picture may be darker. If this is the case, correct the degraded picture quality using HDMI Black Level.
Screen Adjustment 4.12 Film Mode Improve the picture quality to enhance the viewing experience when watching a movie. This option is available when the input source is AV, This option is only available when Interlace mode is selected as scanning mode under HDMI mode. It is not available in progressive scanning mode.
Screen Adjustment 4.13 Dynamic Contrast Maintain optimum contrast by automatically adjusting the contrast between objects and the background. You can enable or disable 4.13.1 Changing the Dynamic Contrast Setting This product can only be controlled by using the remote control. Press MENU on the remote control.
Screen Adjustment 4.14 Lamp Control This function is used to adjust the brightness of the backlight to reduce power consumption. (Range: 0~100) This option is available when (Refer to page 112 for details about 4.14.1 Changing the Lamp Control Setting This product can only be controlled by using the remote control.
Screen Adjustment 4.15 Picture Reset Restore the default picture settings. 4.15.1 Activating Picture Reset This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to The following screen will appear. P i c t u r e R e s e t A d j u s t...
Sound Adjustment Configure the sound (Sound) settings for the product. Mode Select a sound mode (Mode) suitable for the environment where the product will be used. 5.1.1 Changing the Mode Setting This product can only be controlled by using the remote control. Press MENU on the remote control.
Sound Adjustment Custom You can customize the sound settings. 5.2.1 Configuring the Custom Settings This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to The following screen will appear. C u s t o m B a s s T r e b l e...
Sound Adjustment Auto Volume This function can be used to adjust the volume to an appropriate level if the volume is particularly higher or lower than usual. 5.3.1 Changing the Auto Volume Setting This product can only be controlled by using the remote control. Press MENU on the remote control.
Sound Adjustment SRS TS XT You can enjoy the grand and vivid sound quality of 5.1-channel speakers using two speakers. TruSurround (TS) XT provides realistic surround sound through any type of 2-channel speaker system such as internal speakers. It is also fully compatible with all multi-channel formats. 5.4.1 Setting SRS TS XT This product can only be controlled by using the remote control.
Sound Adjustment Sound Reset Return the sound settings to the default factory settings. 5.5.1 Resetting Sound Settings (Sound Reset) This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to Press...
Settings You can configure additional settings as required. Language Set the menu language. English Deutsch Español Türkçe A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 6.1.1 Changing the Language This product can only be controlled by using the remote control.
Settings Time You can configure Clock Set at a specified time using the 6.2.1 Clock Set Set the current time. Changing the Setting for Clock Set This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press...
Settings 6.2.2 Sleep Timer Set the product to automatically power on or off after a specified period of time. You can select the time to turn off the product from 30, 60, 90, 120, 150 or 180 minutes from the current time.
Settings 6.2.3 Timer1 / Timer2 / Timer3 Set the product to automatically power on or off at a specified time. The product will power on, preserving the same volume and input source settings as when it powered off. Setting Timer This product can only be controlled by using the remote control.
Settings 6.2.4 Holiday Management Timer will be disabled during a period specified as a holiday. Setting Holiday Management This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to Press to move to...
Settings Menu Transparency Set the transparency for the menu windows: High, Medium, Low, Opaque Select Menu Transparency a preview for the selected transparency. Move to the option you want, and press [ 6.3.1 Changing Menu Transparency This product can only be controlled by using the remote control. Press MENU on the remote control.
Settings Safety Lock Lock the product in order to prevent the product from malfunction or unintended changes to the settings, or change the PIN used for locking the product. 6.4.1 Change PIN Change the PIN required to lock the product. The default PIN is "0000."...
Settings Re-enter the new PIN. C h a n g e P I N C o n f i r m n e w P I N . 0 . . 9 A d j u s t The PIN has been changed. Entering the current PIN will display a new PIN input window.
Settings Energy Saving Save power with the Energy Saving While Energy Saving mode is active, the product power consumption will be controlled to save power. 6.5.1 Setting Energy Saving This product can only be controlled by using the remote control. Press MENU on the remote control.
Settings Video Wall Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function.
Settings 6.6.2 Format Select a format to display images on multiple displays. Full : Display images in full screen. Natural : Display images at the original resolution without enlarging or reducing. Changing Format This product can only be controlled by using the remote control. Press MENU on the remote control.
Settings 6.6.3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays. Enter the number of horizontally arranged displays. The horizontal screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the vertical arrangement. Setting Horizontal This product can only be controlled by using the remote control.
Settings 6.6.4 Vertical This function automatically divides the screen according to the specified number of vertical displays. Enter the number of vertically arranged displays. The vertical screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the vertical arrangement. Setting Vertical This product can only be controlled by using the remote control.
Settings 6.6.5 Screen Position You can customize the arrangement of split screens by moving displays identified with a number using Screen Position function. Select Screen Position to display the arrangement of displays (identified with a number) specified according to the Horizontal or Vertical settings. To customize the arrangement, move a number (display) using the direction buttons on the remote control and press [ Changing Screen Position This product can only be controlled by using the remote control.
Settings Safety Screen This product uses a Safety Screen stationary image is displayed for an extended period of time. The configure various settings to protect the screen. 6.7.1 Pixel Shift Prevent afterimage burn-in by moving pixels slightly at specified intervals. Setting Pixel Shift This product can only be controlled by using the remote control.
Page 135
Settings Vertical Specify how many pixels you want to move vertically. (Range: 0~4) V e r t i c a l Press to select a number, and press [ A higher value will minimize the chance of afterimage burn-in but slight flickering may occur. Time Set the time interval to move the specified number of pixels horizontally and vertically.
Settings 6.7.2 Timer Easily protect the screen by setting the timer to activate the afterimage burn-in prevention mode. (Bar and Eraser) Setting Timer This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press...
Settings Period You can set the time interval to activate the timer. (Range: 1 to 10 hours) P e r i o d Press to select a number, and press [ Time You can set the time length you want to activate the timer at a specified interval. (10, 20, 30, 40 or 50 seconds) T i m e Press...
Settings 6.7.4 Side Gray Select the brightness of the grey color for blank parts on the screen. Setting Side Grey This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to Press...
Settings Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) 6.9.1 Setting Power On Adjustment This product can only be controlled by using the remote control. Press MENU on the remote control.
Settings 6.10 OSD Rotation You can rotate and display the menu window in portrait mode when the product is in portrait orientation. 6.10.1 Changing the Menu Orientation (OSD Rotation) This product can only be controlled by using the remote control. Press MENU on the remote control.
Settings 6.11 Advanced Settings You can configure advanced settings for your display. 6.11.1 Temperature Safeguard the product by using a protection feature that detects the internal temperature. Configuring Temperature Control This product can only be controlled by using the remote control. Press MENU on the remote control.
Settings 6.11.2 Auto Power Enabling this option will automatically power on the product if the power cable is connected. Changing the Auto Power Setting This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press...
Settings 6.11.4 Standby Control You can set the screen standby mode to be applied when an input signal is received. Setting Standby Control Press MENU on the remote control. Press to move to Press to move to Press to move to Press to move to the option you want and press [ S t a n d b y C o n t r o l...
Settings 6.11.5 Lamp Schedule Setting Lamp Schedule This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to Press to move to Press [ ], and move to Configure the schedule settings enabled at the bottom using the direction keys.
Page 145
Settings Not Optimum Mode OSD N o t O p t i m u m M o d e O S D Press to select the option you want and press [ No Signal OSD N o S i g n a l O S D Press to select the option you want and press [ MDC OSD...
Settings 6.12 Setup Reset This option returns the current settings under Setup to the default factory settings. 6.12.1 Resetting Setup (Setup Reset) This product can only be controlled by using the remote control. Press MENU on the remote control. Press to move to Press to move to...
Requirements Before Contacting Samsung Customer Service Center 7.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
Troubleshooting Guide 7.1.3 Check the followings. The screen keeps switching on and off. Blank spaces are found at the top and bottom of the screen when an HDMI or HDMI-DVI cable is connected to the monitor and PC. The power LED is off. The screen will not switch on.
Page 149
Troubleshooting Guide The screen is not clear. The screen is blurry. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. The screen is too bright. The screen is too dark. Screen color is inconsistent. The colors on the screen have a shadow and are distorted.
Page 150
Troubleshooting Guide The remote control does not work. A beeping sound is heard when my PC is booting. Remote control issue Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected.
Page 151
Troubleshooting Guide Q & A Question How can I change the frequency? Answer Set the frequency on your graphics card. "Windows XP": Go to Control Panel Themes Display Settings and adjust the frequency in Monitor Settings. "Windows ME/2000": Go to Control Panel Settings Advanced Monitor and adjust the frequency...
Page 152
Troubleshooting Guide Question How can I change the resolution? How do I set power-saving mode? Refer to the user manual for your PC or graphics card for further instructions on adjustment.. Answer "Windows XP": Go to Control Panel Themes Display Settings and adjust the resolution.
Specifications General Model Name LCD Panel Size Display area Synchronization Horizontal Vertical Display Color Resolution Optimum resolution Maximum resolution Maximum Pixel Clock Power Supply Signal connectors Dimensions (W x H x D) Weight VESA Mounting Interface Environmental Operating considerations Storage Plug-and-Play Panel Dots (Pixels) The above specifications are subject to change without notice to improve quality.
Page 154
Specifications Class A (business communications device) This product is an EMC-registered Class A Device. This classification must be noted by vendors and users. This product is intended for use in non-home environments. 8 Specifications...
Specifications PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse.
Specifications Preset Timing Modes This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your monitor.
Page 157
Specifications Display Mode VESA, 1280 x 1024 VESA, 1280 x 1024 VESA, 1360 x 768 VESA, 1366 x 768 VESA, 1920 x 1080 VESA, 1920 x 1080 Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.
Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. CANADA MEXICO U.S.A ARGENTINA BRAZIL CHILE COLOMBIA COSTA RICA DOMINICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA...
Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
Page 164
Appendix Powering Off, Screen Saver and Power Saving Mode Power off the product for 4 hours after using it for 20 hours. Power off the product for 2 hours after using it for 12 hours. Go to Display Properties > Power Supply on your PC and set the monitor to power off as required.
Page 165
Appendix The best way to protect the monitor from afterimage burn-in is switching the power off or setting the PC or system to run a screen saver when not in use. Also, Warranty service may be limited depending on instruction guide. Screen Scroll Function Screen Scroll Effect: A black bar moves horizontally.
Appendix Terminology Dot Pitch The monitor and screen consist of red, green and blue dots. A shorter distance between the dots produces a higher resolution. Dot pitch refers to the distance between the shortest distance between dots of the same color. Dot pitch is measured in millimeters. Vertical Frequency The monitor displays a single image many times per second (like a fluorescent light that flickers) to display an image for a viewer to see.
Page 167
Appendix Multiple Display Control (MDC) MDC (Multiple Display Control) is an application that allows multiple display devices to be controlled simultaneously using a PC. Communication between a PC and monitor takes place using RS232C (serial data transmission) and RJ45 (LAN) cables. DVD(Digital Versatile Disc) DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game) applications using MPEG-2 video compression technology.
Appendix Correct Disposal - Europe only Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
Page 169
Index Auto Adjustment Auto Power Auto Volume Balance Batteries Brightness Changing the language Color Color Tone Contrast Custom settings screen Custom settings sound Driver installation Energy Saving Items sold separately Lock function MDC Installation/Uninstallation Mode OSD Rotation PC connection Port Problem report Remote Control Reset All...
Page 170
Index Video connection Zoom1/Zoom2 Index...