Curve D-DF Series Instruction, Operation And Maintenance Manual page 14

5.2.4. - WORK MODE CONFIGURATION: MODE 4-METER DELAY
To access the Work Mode, press: Steps to follow:
Access to the configuration menu
Move the cursor to
(METERDELAY).
desired:
Move
Move the cursor and set the desired measurement
Units: (L).
Move
Save the programmed values.
14
ref: MA-ED-0008-EN-V16.0-MIÑO DESCALCIFICADOR D-DF-M3 & D-UF-M3.pdf
set the regeneration time
+
Confirm
+
Confirm