Curve D-DF Series Instruction, Operation And Maintenance Manual page 11

5.2.1. - WORK MODE CONFIGURACION DEL: MODE 1 - TIMED.
To access the Work Mode, press:
5.2.1.1- TIMED CONFIGURATION & INTERVAL BETWEEN REGENERACIONS:
MODE 1 - TIMED
To access the Work Mode, press:
Steps to follow:
Access to the configuration menu.
Move the cursor to the desired work
(TIME).
configuration:
Move
Save the programmed values.
Steps to follow:
Move the cursor to the desired
regeneration time.
Move the cursor to set the number of
days between regenerations.
11
ref: MA-ED-0008-EN-V16.0-MIÑO DESCALCIFICADOR D-DF-M3 & D-UF-M3.pdf
+
Confirm
Access to the configuration menu.
+
Move
+
Move
Save the programmed values.
Increase
value
Increase
value