Unsetting The System - RSI VIDEO TECHNOLOGIES VIDEOFIED User Manual

Unsetting the system

Set off an alarm
7
1. From your keypad
 Press the button on the keypad
 Enter your access code and press
 The keypad display will then show the following message
2. From your remote control
 Press the button and release after the first beep sounds
 The remote control will beep twice in confirmation
1. From the keypad
 Press the button on the keypad
 Press for 2 seconds.
After 3 short beeps, the control unit will emit a sharp beep
 Press or
2. From your remote control
 Press for more than 2 seconds on one of the bottom buttons.
There are two alarms possible with the remote control:
silent alarm , alarm with siren
You can turn off the siren at any time
by entering your user code followed by
or by pressing the
or
or
button on your remote control
to confirm
MoN 21/10 18:10
dISARMEd lVl:3