Programming Your System - RSI VIDEO TECHNOLOGIES VIDEOFIED User Manual

Unsetting after an alarm (alarm memo)
 If an alarm has activated, during the unsetting of your system the screen
of the keypad provides you with details of what caused the alarm
 Press the
of the cause of the alarm
 Then the keypad goes into standby mode after 40 seconds

Programming your system

From your keypad
1. Accessing programming mode
 To access the various menus press the arrow keys
on the keypad
You need to go to level 3 to access management of the access codes
 From the main menu:
 Press
 Change the level by pressing twice on
 Confirm by pressing
 Enter the level 3 code then press
 Return to the main menu by pressing once on
2. Add a new access code
 Press
 Confirm with
 Enter an existing level 3 code (master code) and confirm with
 To record a new code press
 Enter the code (4 to 6 digits) followed by
 Enter the name associated with this code (SMS type data entry),
for example: HELENA, confirm by
NOTe: Creation of a code generates 2 sub-codes:
Code + 1: code which allows shutdown of the system while generating a silent alarm
Code + 2: code which allows shutdown of the system while generating an audible alarm
Example: Code 1999 will give respectively
button to check the alarm memo and the keypad then gives details
AREA N°
dETECToR NAME
ACCESS lEVEl
ACCESS lEVEl
lEVEl: 1
BAdGE oR CodE?
several times until the following screen menu appears
button
once again
2000 (silent alarm) and 2001 (audible alarm)
(displayed for 5 seconds)
1
ACCESS lEVEl
lEVEl: 3
to confirm
ACCESS lEVEl
lEVEl: 3
, confirm this code followed by
INTRUSIoN
dETECTEd
or
BAdGES/
ACCESS CodES
8