Toyota HIACE 2006 Owner's Manual page 76

q13292
2. Install a locking clip near the tab of
the lap and shoulder belt by inserting
the lap and shoulder webbing through
the recesses of the locking clip. Buckle
the belt again. If the belt has any
slack, release the buckle and reinstall
the locking clip.
If your child restraint system does not
provide a locking clip, you can purchase
one at your Toyota dealer. (See "-Child
restraint system" on page 61 for details.)
&
CAUTION
• After inserting the tab, make sure
the tab and buckle are locked and
that the lap and shoulder portions
of the belt are not twisted.
• Do not insert coins, clips, etc. in
the buckle as this may prevent your
child from properly latching the tab
and buckle.
• If the seat belt does not function
normally, it cannot protect your
child from death or serious injury.
Contact your Toyota dealer immedi-
ately. Do not install the child
restraint system on the seat until
the seat belt is fixed.
• Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
67