Wireless Network - Samsung HT-C9930 User Manual

Wireless Network

You can connect to the network with a Wireless IP sharer.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product.
- This unit is compatible with the supplied Wireless LAN Adapter.
2. Set the network options. (See page 43)
Broadband
service
✎
NOTE

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)

Wireless LAN, in its nature, may cause interference, depending on the use condition (AP performance, distance, obstacle,
interference by other radio devices, etc).

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, AES

For the AllShare function, a PC must be connected in the network as shown in the fi gure.
HT-C9930_ELS_0914.indd 31 HT-C9930_ELS_0914.indd 31
Wireless IP sharer
PC
Networking with PC for
AllShare function
(See pages 66~67)
Wireless LAN Adapter
English
2010-09-14 2010-09-14
31
6:52:25 6:52:25