Connecting The Fm Antenna; Attaching The Toroidal Ferrite Core To The Speaker Cable - Samsung HT-C9930 User Manual

Connections
HDMI Auto Detection Function
For possible HDMI resolutions, see page 36.
•
This function is not available if the HDMI cable does not support CEC.
•
HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
•
What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via HDMI
from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV,
projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
!
CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product.
1. Connect the FM antenna supplied to the FM ANT
Jack.
2. Slowly move the antenna wire around until you fi nd a
location where reception is good, then fasten it to a
wall or other rigid surface.
✎
NOTE

This product does not receive AM broadcasts.

Attaching the Toroidal Ferrite Core to the Speaker Cable

1. Open the smaller ferrite core by pulling up the tab.
2. Arrange up the speaker cables that are connected to the
FRONT L (+,-) terminal before making 3 loops of them.
3. Attach the ferrite core to the arranged cables and press to
close it until you hear a click.
•
Insert the ferrite core as close to the sub woofer as
possible.
4. Follow steps 1 through 3 above and insert the ferrite core
to the speaker cables that are connected to the FRONT R
(+,-) terminal of the sub woofer.
!
CAUTION

Before connecting the speakers, connect the main unit to the subwoofer using the system cable.
See page 22.
28
English
HT-C9930_ELS_0914.indd 28 HT-C9930_ELS_0914.indd 28

Connecting the FM Antenna

FM Antenna
(supplied)
2010-09-14 2010-09-14 6:52:16 6:52:16