Wireless Network - Samsung HT-J5500K User Manual

Settings
Network Settings
Wired network connection failed.
MAC Address
IP Address
Subnet Mask
Gateway
DNS Server
Unable to connect to the network. Try the following: check if your IP address is set
correctly in IP Settings. Contact your Internet Service Provider for more information.
Change Network IP Settings
a Previous
2. Use the ◄► buttons to select IP Settings, and
then press the v button. The IP Settings
screen appears.
3. Select the IP Setting field, and then set it to
Enter manually.
4. Select a parameter to enter (IP Address, for
example), and then press v . Use the number
keypad on your remote control to enter the
numbers for the parameter. You can also enter
numbers using the ▲▼ buttons. Use the ◄►
buttons on the remote control to move from
entry field to entry field within a parameter. When
done with one parameter, press the v button.
5.
Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 4.
6.
Repeat Steps 4 and 5 until you have filled in all
parameters.
✎
You can get the network parameter values from
your Internet provider.
7.
When finished entering all the parameter values,
select Return ( ' ), and then press the v
button. The home theater verifies the network
connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
XX:XX:XX:XX:XX:XX
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
0. 0. 0. 0
Retry Close
d Skip < Move " Select
22
- English
Wireless - Automatic
Ğ Ğ
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 21)
1. In the Network Settings screen, change
Network Type to Wireless. The product
searches for and then displays a list of the
available networks.
Network Settings
Select your network type.
Network Type Wireless
Wireless network
si-ap
✓
MIC
KIMING_VTOWER
WPS(PBC) Search
2.
Select the desired network, and then press the
v button.
3. On the Security Key screen, enter your
network's security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting
a letter with ▲▼◄► buttons, and then pressing
v button.
4. When finished, select Done, and then press the
v button. The product verifies the network
connection and then connects to the network.
✎
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
Ğ Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 21)
1. In the Network Settings screen, change
Network Type to Wireless. The product
searches for and then displays a list of the
available networks.
2.
Scroll through the list, select the desired network
or Add Network, and then press the v button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
You can connect your BD
Home Theater to the
internet. Please select which
wireless network to use.
m Move " Select ' Return