Presetting Stations; Listening To Radio - Samsung HT-C9930 User Manual

Listening to Radio

Using buttons on the Remote Control
1. Press the FUNCTION button to select TUNER.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the # $ button
is pressed, a preset broadcast station is selected.
•
Automatic Tuning 2 : Press and hold the
TUNING/CH (
search for active broadcasting stations.
•
Manual Tuning : Press the TUNING/CH
( ) button to increase or decrease the
frequency incrementally.
Setting Mono/Stereo
Press the MO/ST button.
•
Each time the button is pressed, the
sound switches between STEREO
and MONO.
•
In a poor reception area, select
MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory
1. Press the FUNCTION button to select TUNER.
Press the TUNING/CH (
2.
<89.10>.
3. Press the TUNER MEMORY button.
•
NUMBER fl ashes on the display.
Press the # $ button to select
4.
preset number.
•
You can select between 1 and 15
presets.
5. Press the TUNER MEMORY button again.
•
Press the TUNER MEMORY button before
NUMBER disappears from the display.
•
NUMBER disappears from the display and
the station is stored in memory.
6. To preset another station, repeat steps 2 to 5.
• To tune in to a preset station, press the # $
button on the remote control to select a channel.
HT-C9930_ELS_0914.indd 59 HT-C9930_ELS_0914.indd 59
) button to automatically
) button to select
Use iPod/iPhone with a Wireless Dock
Cradle for iPod/iPhone
You can enjoy fi ner quality of music through the
speaker by sending iPod/iPhone's audio signal
using a Wireless Transmitter.
The Wireless Transmitter's linking ID is preset at
the factory and the main unit and Wireless
Transmitter should link (connect wirelessly)
automatically when main unit is turned on. If the
link indicator does not light when main unit and
Wireless Transmitter are turned on, ID setting
must be made manually. (See page 60)
Turn on the main unit and connect the iPod/
iPhone to the Wireless transmitter.
Then press the FUNC. button on the product to
select "iPod" mode.
The FUNC. mode of the main unit will switches
as follows. Repeatedly press BD/DVD
AUX iPod HDMI 1
(See page 14)
How to charge the Wireless Transmitter
1. Connect the Wireless Transmitter to the
Charging Cradle.
2. Connect the DC power adaptor to a wall
socket.
•
The charging indicator lights up and charging
starts. After the battery is fully charged, the
charging indicator turns Green.
Operation status of the charging cradle's LED
Display
Power on /Charging
GREEN LED ON
RED LED ON
D.IN
HDMI 2 TUNER
Function
completed
Charging.
59
English
2010-09-14 2010-09-14 6:53:50 6:53:50