Setting Up The Audio Options - Samsung SV-DVD940 Instruction Manual

DVD
GB
Setup
Display Setup
Dolby Digital Out
MPEG-2 Digital Out
DTS
PCM Down Sampling
46

Setting Up the Audio Options

Setup
Setup :
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or ❿ button.
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using ,
3
Select Audio Setup using
❿ button.
4
Use the , buttons to select the desired item.
❷
Then press the OK or ❿ button.
• Dolby Digital Out
1. PCM:
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2.
Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
• Be sure to select the correct Digital Output or no audio will be
heard.
• MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).Select Bitstream when using the
Digital Audio Output.
• DTS
1. Off :
Doesn't output digital signal.
2. On :
Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
• Dynamic Compression
1. On :
To select dynamic compression.
2. Off :
To select the standard range.
• PCM Down Sampling
1. On :
Select this when the amplifier connected to the player is not
96KHz compatible.
In this case, the 96KHz signals will be down converted to
48KHZ.
2. Off :
Select this when the amplifier connected to the player is
96KHz compatible.
In this case, all signals will be output without any changes.
buttons, then OK or ❿ button.
❷
, buttons, then press the OK or
❷