Table of Contents
Advertisement
VCR
GB
Language
Install
User Set
Auto Power Off
Screen Messages
Auto Setup
Manual Setup
A
NL
B
I
DK
N
FIN
P
D
E
Your date will be lost
Press OK to continue
Menu
Please Wait
18
Presetting the Stations Automatically
: English
: Off
: On
Install
COUNTRY SELECTION
S
PL
CH
CZ
TR
OTHERS
GR
HU
Auto Setup
to exit
Auto Setup
15%
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 13).
Your DVD-VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Plug & Auto Set up (see page 13)
Automatically
Manually (see page 19)
You can store up to 80 stations.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
option.
3
Press the OK or ❿ to select this option.
Result:
The
Install
4
Press the corresponding
is selected.
Setup
And then press the OK or ❿ to select this option.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5
Press the
or
buttons to select your country.
❷
The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
6
Press OK button.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
7
Press OK to start the auto scanning.
Result:
The
Please Wait
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The DVD-VCR then searches for the second station
and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
8
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 16).
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
,
buttons to select the
Install
❷
menu is displayed.
or
buttons, until the
Auto
❷
indication highlight on the
Advertisement
Table of Contents
