Connecting Dvd-Vcr To The Tv Using The Scart Cable; Connecting Dvd-Vcr To A Satellite Receiver Or Other Equipment - Samsung SV-DVD440 User Manual

Connecting DVD-VCR to the TV
using the SCART Cable
You can connect your DVD-VCR to the television using
the SCART cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your
DVD-VCR
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
Make sure that both the television and the DVD-
VCR are switched off before connecting the
cables.
1
Connect the coaxial cable as indicated on page 7.
2
Connect one end of the SCART cable to the AV1
(EURO AV) socket on the rear of the DVD-VCR.
3
Plug the other end into the appropriate connector
on the television.
TV
3
SCART Cable
RF coaxial cable
Aerial
2
ENG-8
Connecting DVD-VCR to a Satellite
Receiver or Other Equipment
You can connect your DVD-VCR to a Satellite receiver
or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment
chosen. The following illustrations give a few examples
of the connection possibilities.
1
AV1(EURO AV): By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or
other equipment into the AV1 (EURO AV) socket on
the rear of the DVD-VCR.
After making this connection, select the source by
pressing the INPUT SEL. button for the AV1 input
sources.
2
By means of RF Coaxial Cable
After making this connection, you must preset the
station received through the satellite tuner.
RF output channel of the satellite receiver should
be adjusted away from channel 36, which is used
by the DVD-VCR, e.g. re-adjust to channel 39.
Satellite Receiver or other Equipment
TV
1
SCART Cable
RF coaxial cable
Aerial
Aerial Connector
2