Table of Contents
Advertisement
1.3
BLACK
PLASTIC
SPACER
35mm hole
Pass all the hoses, tubes and USB lead
through the 35mm hole.
1.5
Blue hose to
Chilled outlet
Note: All
silicon tubes
must be cut to
size. They must
have a constant
fall back to the
unit.
801525NZ - Chilled HydroTap Installation Instructions - Aug 2015 - v2.00
Installation Instructions
Fit the
STAINLESS STEEL
WASHER,
SPIDER CLAMP,
AND 6mm NUT.
Note
electrical cable evenly in between the legs of
the SPIDER CLAMP when installing.
Incoming water
feed each of the three tubes and
:
- Mains hose
length is 750mm
- Plug and Cord
length is 1800mm
Position the under
Blue hose
sink unit close
to chilled
to the outlet tap,
water outlet
within reach of
the hose and cord
lengths supplied
1.4
STAINLESS
STEEL WASHER
SPIDER CLAMP
6mm NUT
Note:
Page 11 of 20
Advertisement
Table of Contents
